VEIKK , A50 , DRAWING , TABLET , 10 | {attribute:VEIKK , A50 , DRAWING , TABLET , 10 |
---|
MERCUSYS MW302R 300MBPS MULTI-MODE WIRELESS N ROUTER
$ 14.00 Original price was: $ 14.00.$ 12.00Current price is: $ 12.00.
Related products
NETIS E3 AC1200 DUAL BAND REPEATER WITH LAN
NETIS E3 AC1200 DUAL BAND REPEATER WITH LAN
Wireless | |
Standards | IEEE 802.11b/g/n 2.4GHz |
IEEE 802.11a/n/ac 5GHz | |
Signal Rate | Up to 300Mbps 2.4GHz |
Up to 866Mbps 5GHz | |
Frequency Range | 2.4-2.4835GHz and 5.150~5.85GHz |
Transmit Power | 20dBm(MAX) |
Data Transfer Rates | 802.11n: 40MHz (300Mbps, 270Mbps, 240Mbps, 180Mbps, 120Mbps, 90Mbps, 60Mbps, 30Mbps) 20MHz (144Mbps, 130Mbps, 115Mbps, 86Mbps, 57Mbps, 43Mbps, 28Mbps, 14Mbps) (Auto-Sense) 801.11g: (54Mbps, 48Mbps, 36Mbps, 24Mbps, 18Mbps, 12Mbps, 11Mbps, 9Mbps, 6Mbps) 802.11b: (11Mbps, 9Mbps, 6Mbps, 5.5Mbps, 2Mbps, 1Mbps) |
Wireless Modes | Router, AP, Repeater |
Wireless Security | Support 64/128-bit WEP, WPA-PSK/WPA2-PSK (TKIP/AES) |
Hardware | |
Standards | IEEE 802.11b/g/n/ac |
Interface | 1*10/100Mbps Auto MDI/MDIX RJ45 LAN/WAN Port |
2x2 11b/g/n/ac 2.4/5 GHz dual band | |
Buttons | 1x WPS button/ 1x Reset to default button |
LED Indicators | Power/Single Good/Single Poor/WPS |
Antenna | 2*Omnidirectional Antenna |
Power Supply | DC 3.35V/3A |
Dimensions(L x W x H) | 80mm*76.5mm*54mm |
Others | Support IPv4 / IPv6 / DHCP server/ LAN IP set / Firmware Upgrade/Diagnostic / Ping Watchdog / System Log |
Advanced | Firmware Upgrade, Factory Defaults, Reboot |
TPLINK NETWORK CARD 1 GB PCI-E 3468
Gigabit PCI Express Network Adapter
- 10/100/1000Mbps PCIe Adapter
- 32-bit PCIe interface, saving the finite chassis space
- Wake-on-LAN, convenient to manage over LAN
HARDWARE FEATURES | |
---|---|
Standards and Protocols | IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.1q, 802.1p, CSMA/CD, TCP/IP |
Interface | 32-bit PCI Express 1 10/100/1000Mbps RJ45 port |
Network Media | 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 1000Base-T: UTP category 5, 5e cable (maximum 100m) |
LED | Status |
Wireless Standards | IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x |
Data Rates | 10/100/1000Mbps for Half-Duplex mode 20/200/2000Mbps for Full-Duplex mode |
LED Indicator | 1000Mbps Link/Act, 100Mbps Link/Act, 10Mbps Link/Act |
Dimensions | 3.1 × 4.8 × 0.8 in (78.5 × 120.8 × 21.5mm) |
Flow Control | IEEE 802.3x Flow Control (Full-Duplex) |
NETWORK CABLE TESTER BOSHENG
TPLINK 300Mbps ADSL2+ Modem Router TD-W8961ND
- ADSL 2/2+ Modem, Wireless N Access Point and 4-Port Router, in a single device
- Wireless N speed up to 300Mbps makes it ideal for heavy bandwidth consuming or interruption sensitive applications like online gaming, Internet calls and even HD video streaming
- Easy Setup Assistant with multi-language support provides quick & hassle-free installation
- Easy one-touch wireless security encryption with the"WPS" button and Easy Wi-Fi On/Off button
TPLINK DECO S7 3 PACK AC1900 WHOLE HOME MESH WIFI SYSTEM
TPLINK DECO S7 3 PACK AC1900 WHOLE HOME MESH WIFI SYSTEM
AC1900 Whole Home Mesh Wi-Fi System
WIRELESS | |
---|---|
Standards | Wi-Fi 5 IEEE 802.11ac/n/a 5 GHz IEEE 802.11n/b/g 2.4 GHz |
WiFi Speeds | AC1900 5 GHz: 1300 Mbps (802.11ac) 2.4 GHz: 600 Mbps (802.11n) |
WiFi Range | 3-5 Bedroom Houses (3-pack) TP-Link Mesh Technology Optional Ethernet backhaul works together to link Deco units to provide seamless coverage3× Antennas (Internal) Multiple antennas form a signal-boosting array to cover more directions and large areasBeamforming Concentrates wireless signal strength towards clients to expand WiFi range |
WiFi Capacity | Medium Dual-Band Distribute devices to different bands for optimal performanceMU-MIMO Simultaneously communicates with multiple MU-MIMO clients |
Working Modes | Router Mode Access Point Mode |
HARDWARE | |
---|---|
Ethernet Ports | 3× Gigabit Ports*Per Deco Unit Supports WAN/LAN auto-sensing |
Buttons | Reset Button |
SECURITY | |
---|---|
WiFi Encryption | WPA-Personal WPA2-Personal |
Network Security | SPI Firewall Access Control |
Guest Network | 1× 5 GHz Guest Network 1× 2.4 GHz Guest Network |
SOFTWARE | |
---|---|
Protocol | IPv4 IPv6 |
Parental Controls | URL Filtering Time Controls |
WAN Type | Dynamic IP Static IP PPPoE PPTP L2TP |
Quality of Service | QoS by Device |
Cloud Service | OTA Firmware Upgrade TP-Link ID DDNS |
NAT Forwarding | Port Forwarding UPnP |
IPTV | IGMP Proxy IGMP Snooping Bridge Tag VLAN |
DHCP | Address Reservation DHCP Client List Server |
DDNS | TP-Link |
Management | Deco App |
TEST DATA | |
---|---|
WiFi Transmission Power | CE: <20 dBm (2.4 GHz) <23 dBm (5 GHz) FCC: <30 dBm (2.4 GHz) <30 dBm (5 GHz) |
PHYSICAL | |
---|---|
Dimensions (W×D×H) | 6.4 × 3.6 × 3.6 in (162.3 × 90.7 × 90.7 mm) |
Package Contents | Deco S7 (3-pack) 3 Deco S7 Units 1 RJ45 Ethernet Cable 3 Power Adapters Quick Installation GuideDeco S7 (2-pack) 2 Deco S7 Units 1 RJ45 Ethernet Cable 2 Power Adapters Quick Installation GuideDeco S7 (1-pack) 1 Deco S7 Unit 1 RJ45 Ethernet Cable 1 Power Adapter Quick Installation Guide |
Gigabit Ethernet Fiber Media Converters, a pair of 10/100/1000M RJ45 to 1000M Bi-Directional Single-Mode SC Fiber
- Optical Port: 1.25Gbps, 1310nm/1550nm, Single-Mode SC Optic Fiber UP TO 3K
- RJ45 Port: Auto-detective 10M/100M/1000Mbps Cat5 Cable
- Complies with IEEE IEEE 802.3/802.3u/802.3z/802.3ab
- Connect the power cord to the Converter and check that the Power LED lights up. The TP Act and FX Act LEDs will turn on when all the cable connections satisfied
- What In Box: A pair of Ethernet Media Converter, 2x DC Power Adapter, 1x Product Manual.
Wavlink USB 2.0 Network Print Server, LAN Print Share Server for USB Printers, LPR Print Protocol 10/100Mbps Computer Print Server Adapter for Windows 7/8/8.1/XP/10/11/Vista, MacOS 10.7 or Above
Expert Features
⭐USB2.0 Network Printer:
- Tired of maintaining the printer's host PC? Wavlink print server converts an old USB printer into a network printer, sharing a USB printer with multiple users over an Ethernet.
- No additional printers are needed and save money, space and less cable mess.
⭐Print From Anywhere:
- Print from any computer connected to the LAN.
- This print server doesn’t require a wired connection to the computer, however you must connect the server to your network device (eg. router/switch) with the included RJ45 network cable.
⭐Note Before Purchase:
- This print server requires networking and computer system settings, No Driver Required.
- Read "Printer Compatibility List" in "Product Document" before purchase.
- GUI(Graphical User Interface)-based management, DHCP and auto IP supported.
⭐Extensive Compatibility:
- This print adapter is USB2.0 compliant, it works with Windows 2003/2008/2012/XP/Vista/7/8/8.1/10/11, Mac 10.7 or later. Compatible with almost all the USB printers such as ink-jet printer, laser printer, needle printer, multi-function printer, etc..
⭐Perfect Solution:
- This USB printer network adapter allows any computer in the same LAN to access the USB printer connected with this print server device.
- It is suitable for home or business applications, and government or educational institutions that require shared printing capabilities.
- Please download the latest user manual on the listing page. If any problems, please contact us first. We have professional team to solve your problems.
From The Manufacturer
Wavlink new palm-sized Networking USB 2.0 Server enables any USB printer into wired network printer so printer can be accessed by all computer users on the network, provides users with an auto-sensing Ethernet port that works with either 10Base-T or 100Base-T networks.
Print Over LAN
Connect a USB-only printer to the LAN and share it among all computers on the network.
Easy Configuration
Easy configuration with intuitive web based GUI(Graphics User Interface)
Easy to use:
- 1.Connect power adapter.
- 2.Connect the printer with the USB-A cable(Not Included).
- 3.Connect to network with the Ethernet cable(Included).
- 4.Install the printer driver & follow the manual to configure the printer and network settings, then you can print from any computer on the network.
Features & Tips:
- 10Base-T/100Base-T auto-sensing.
- Easily connect your USB printer to a network.
- Allows multiple computers to share one USB printer on the network.
- Print from any computer on your network. - Works with any home or office Ethernet network. - Supports protocol: LPR
- The built-in web management feature provides more convenience by allowing the user to configure, monitor and even reset the print server via a web browser.
- This Print Server is NOT PLUG and PLAY, it requires networking and computer system settings to get better printing experience.
- Read "Printer Compatibility List" in “Product Document” before purchase.
- Make sure your computers and the print server are in the same local network (subnet, LAN).
- This product can only be connected to a router or switch via a network cable. Do not support broadcasting wifi. However, you should connect the device to the wireless router and share the printer via wifi of the router.
Package List:
- 1x Instruction Manual
- 1x Power Adapter (Length: 120cm/3.9ft/47in)
- 1x RJ45 Ethernet Cable (Length:100cm/3.3ft/39.4in)
- 1x Networking USB LPR Print Server (Dimensions: 54*54*25mm / 2.1*2.1*1inches)
- System Requirement: Windows 2003/2008/2012/XP/7/8/8.1/10/11, Mac 10.7 or later.
TPLINK AC1200 Deco M4 3PACK Home Mesh WiFi System
Deco M4
AC1200 Deco Whole Home Mesh WiFi System
- Whole Home Coverage: Deco M4 (3-pack) uses a system of units to achieve seamless whole-home WiFi coverage up to 5,500 sq. ft. — eliminate weak signal areas once and for all!*
- TP-Link Mesh Technology: With advanced Deco Mesh Technology, units work together to form a unified network with a single network name. Devices automatically switch between Decos as you move through your home for the fastest possible speeds**
- Fast Dual-Band WiFi: Deco M4 provides fast and stable connections with speeds of up to 1167 Mbps and works with major internet service provider (ISP) and modem.*
- Connect More Devices: Deco can handle traffic from even the busiest of networks, providing lag-free connections for up to 100 devices.*
- Parental Controls: Limit online time and block inappropriate websites according to unique profiles created for each family member.
- Easy Setup: Setup is easier than ever with the Deco app there to walk you through every step.
From the manufacturer
Fast and Seamless WiFi throughout Your Home
Get fast and seamless WiFi throughout your home. 3 Deco M4 units work together to create a single network that provides coverage up to 5,500 sq. ft, so you can keep your devices connected even as you move around. Enjoy smooth streaming and gaming from your bedroom to your backyard with no additional work.
Secure WiFi
Keep your family safe and devices secure with advanced WPA/WPA2 wireless encryption, parental controls and guest access.
Robust Parental Controls
Limit online time and block inappropriate contents for each family member, and pause WiFi on kids’ devices, like during dinner or bedtime.
Create a Guest Network
Set up separate WiFi profiles for guests and share the password to make it easier for them to hop online.
Simple Management
Manage your Deco at home or away using the Deco app. Check connected devices, pause the internet and more.