CUDY 24-Port Gigabit Unmanaged Switch – 24 GbE switch with VLAN/Extend functions and Fanless Cooling – Default/VLAN/Extend Modes – 250 Meters Transmission – Clients Isolation VLAN | BLACK GS1024 3.0
CUDY 24-Port Gigabit Unmanaged Switch
Expert Features
- VLAN Mode : Protect clients from attack from client-side hacking. With VLAN mode, downlink ports 1-22 can only communicate with uplink ports.
- Extend Mode : Prolong the transmission distance of ports 1-22 to a maximum of 250 meters and simplify installation. (These ports' speed will be capped at 10 Mbps)
- DSCP/802.1p QoS : Identify the packets with DSCP headers and forward those with higher priority first.
- IGMP Snooping : Identifies the multicast groups connected to the switch and sends data to the exact ports instead of broadcasting them.
- Loop Prevention : Blocks the ports automatically when it detects a loop in the network, preventing downtime caused by maloperation.
- Fanless Cooling : Low heat generation and fanless design cater to noise-sensitive environments .
Expert Specs
| Model Version | GS1024 3.0 | |
|---|---|---|
| Interfaces | Physical Buttons | VLAN/Default/Extend DIP Switch |
| Gigabit RJ45 Ports | 24 | |
| Extend Mode Ports | #1~#22 | |
| VLAN Mode Ports | #1~#22 | |
| LED |
|
|
| Power Input | AC Inlet | |
| Performance | Copper Speed and Distance |
|
| Copper Speed and Distance Note | 250-meter transmission is only available on the Extend Mode ports. | |
| MAC Address Table | 8192 | |
| Max Switching Capacity | 48 Gbps | |
| Max Forwarding Rate | 35.712 Mpps | |
| Jumbo Frame | 15 KB | |
| Packet Buffer | 4 Mbit | |
| Power | Basic Power Saving | True |
| Power Methods | AC | |
| AC | 90~260V 50/60Hz | |
| Max Power Consumption | 11W | |
| Idle Power Consumption | 6.8W | |
| Switching | 802.3 Protocols |
|
| 802.1 Protocols | 802.1p: LAN Layer 2 QoS/CoS | |
| L2 Features |
|
|
| Reliability | Grounding Methods |
|
| Lightning/Surge Protection | RJ45: 4KV AC: CM 4KV/DM 2KV | |
| ESD Contact Protection | 6KV | |
| ESD Air Protection | 8KV | |
| Environment | Operating Temperature: 0 ℃ ~ 40 ℃ (32 ℉ ~104 ℉) Storage Temperature: -40 ℃ ~ 70 ℃ (-40 ℉ ~ 158 ℉) Operating Humidity: 10% ~ 90% non-condensing Storage Humidity: 5% ~ 90% non-condensing | |
| Mechanical | Dimension | 270×182×44 mm 10.63×7.17×1.73 inches |
| Product Weight | 1059 g (37.36 oz.) | |
| Casing Material | Metal | |
| Installation |
|
|
| Package Content |
|
|
CUDY 26-Port Gigabit Ethernet Unmanaged PoE+ Switch, 300W, 24 * 100/1000Mbps PoE+ Ports, 2 Gigabit SFP, CCTV / VLAN Mode, 19-inch Rackmount, 802.3af/at | BLACK GS1028PS2
26-Port Gigabit Ethernet Unmanaged PoE+ Switch
Expert Features
- 24 PORT | 24 x GbE PoE+ 300W | 2 x SFP: 24 Gigabit PoE+ ports with 300W total power budget, support up to 32w for one port. 2 Gigabit SFP Port provide flexibility in network access management
- One Key Switch for CCTV and VLAN: CCTV function support remote power and data feeding up to 250m long distance, which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras. VLAN mode isolate the PoE+ ports from each other, which can improve the network environment and reduces network maintenance costs.
- PD Detect and PD Alive: PoE ports can automatically detect and supply power to IEEE802.3af/at compliant Powered Devices (PD). PD Alive check function (watchdog) supports monitor connected PD (Powered Device) status. If a PD stops working and responding, this PoE switch will reactivate the PD by resuming POE port power. It also support port power supply prioritization, guarantee the continuous power supply of key nodes.
- Desktop and Rackmount Support: 19-inch metal shape supports desktop or rackmount placement, and includes all the necessary mounting hardware in the box.
- High Quality chipset inside: Use High Quality POE chipset to ensure stable operation of the product.Plug & play: Mode A alternative 1/2 (+), 3/6 (-) power supply, simple set up with no software or configuration needed. 19-inch metal shape supports desktop or rackmount placement, and includes all the necessary mounting hardware in the box.
D-Link DIR-X1860M AX1800 WiFi 6 11ax Router , Dual Band WiFi Up to 4 Streams , 3 Gigabit LAN Ports , 1 WAN Port , Four High Gain Antennas , Multiple Operation Modes – WHITE
D Link DIR X1860M AX1800 WiFi 6 11ax Router
Expert Features
- Wi-Fi 6 (11ax) Speeds up to AX18001
- Dual-band Wi-Fi with up to 4 simultaneous streams
- 3 x Gigabit LAN Ports and 1 x Gigabit WAN Port
- 4x High-Gain 5 dBi External Antennas
- Multiple Operation Modes: Router, Access Point, Repeater, Wireless Client,
- The Latest 128-bit Wi-Fi Encryption
- L2TP, PPTP VPN Clients
- Dual Access PPPOE
- Mesh Ready
Expert Specs
Device Interface
• 1x 10/100/1000 WAN Ethernet • 3x 10/100/1000 LAN EthernetLED
• Status LEDButtons
• WPS button to set up wireless connection • RESET button to restore factory default settingsAntenna
• 2x 5dBi 2.4GHz External Antennas • 2x 5dBi 5GHz External Antennas Power connector • Power input connector (DC)WAN connection types
• PPPoE • PPPoE Dual Stack • Static IP • Dynamic IP • PPPoE + Static IP (PPPoE Dual Access) • PPPoE + Dynamic IP (PPPoE Dual Access)Network functions
• DHCP server/client • Dynamic DNS • Static routingFirewall functions
• Network Address Translation (NAT) • Stateful Packet Inspection (SPI) • URL filter • MAC filter • IP filtering • Port filtering • DMZ and Port forwarding(Virtual server) • NAPT and ALG • Denial of Service (DoS) protectionVPN
• PPTP/L2TPManagement
• Firmware update via web-based interface • Saving/restoring configuration to/form file • Access settings through WEB GUI • Automatic NTP Date/time from Internet Time Server • TR-069 remote management • Logs and statistics • IPSec/PPTP/L2TP pass-throughStandards
• IEEE 802.11 a/b/g/n/ac/axFrequency & Data Rate
• 2.4GHz: up to 600Mbps • 5GHz: up to 1200MbpsWireless connection security
• WPA/WPA2/WPA3 Encryption • MAC filter • WPSAdvanced functions
• Wireless Client Mode • Wireless AP Mode • Wireless Repeater Mode • Mesh Ready • Multiple SSID’s • Wireless ScheduleDimensions (L x W x H)
• 228mm x 147.8mm x 34mmPower
• Input: 12V DC, 1ATemperature
• Operating: from 0 to 40 °C • Storage: from -10 to 70 °CHumidity
• Operating: from 10% to 90% (non-condensing)
D-Link Ethernet Switch, 16 Port Gigabit Unmanaged Network Internet Hub Desktop Rackmount, Plug N Play , Intelligent power Optimization (DGS-1016C)
16 Port Gigabit Unmanaged Network Switch
DGS-1016C
16 Port Gigabit Unmanaged Network Switch
D-Link Ethernet Switch, 16 Port Gigabit Unmanaged Network Internet Hub Desktop Rackmount, Plug N Play , Intelligent power Optimization (DGS-1016C)
Expert Features
- High-speed connections: sixteen (16) Gigabit (10/100/1000) Ports for bandwidth-demanding networks
- Plug-and-play installation: easily set up your network without meticulous configuration
- Energy-efficient and: save energy and reduces power to Ports when there's no traffic
- Intelligent power Optimization: optimizes power usage for a port based on the length of cable connected to it
- Solid, metal housing: Durable for Rack mounting and lifetime use
- Fanless design: Quiet operation that's ideal for office s
- Rack mountable: mounts in standard 19" Rack and sits on table tops
DGS-1016C
16 Port Gigabit Unmanaged Network Switch
D-Link Ethernet Switch, 16 Port Gigabit Unmanaged Network Internet Hub Desktop Rackmount, Plug N Play , Intelligent power Optimization (DGS-1016C) 
D-Link Ethernet Switch, 5 Port Gigabit 10/100/1000 Mbps Unmanaged Metal Switch Desktop , Plug and Play , LEDs Lights Cables Diagnostics , Compact (DGS-F105), Black
5 Port Gigabit Unmanaged Metal Switch F105
DGS-F105
5 Port Gigabit Unmanaged Metal Switch F105
D-Link Ethernet Switch, 5 Port Gigabit 10/100/1000 Mbps Unmanaged Metal Switch Desktop , Plug and Play , LEDs Lights Cables Diagnostics , Compact (DGS-F105), Black
Expert Features
- 5 GIGABIT PORTS – High-speed Gigabit ports allow you to connect up to 5 devices for fast file transfers and smooth media streaming
- DURABLE DESIGN - The DGS-105 packs full functionality and Gigabit performance into a sturdy metal design
- QUALITY OF SERVICE - QoS support also enhances your network’s efficiency. QoS cleverly prioritizes network traffic so that time-sensitive data, such as VoIP or surveillance footage, are unaffected even during bursts of high-volume traffic. This allows for an all-around smoother, uninterrupted network experience
- IGMP SNOOPING - Optimizes multicast data streams preventing unnecessary traffic and saving bandwidth
- SILENT OPERATION – With its fanless design, the DGS-105 provides silent operation, perfect for noise-sensitive environments
- ENERGY-EFFICIENT DESIGN - Compliant with IEEE802.3az Energy Efficient Ethernet. Reduces heat generated and allows the switch to run silently while lowering the cost to operate
- AUTO POWER REDUCTION - Auto power reduction when the port has little or no traffic
- CABLE-LENGTH DETECTION - The DGS-F105 can determine the approximate length of cables attached to each port to apply just enough power for data transmission on that link, saving even more power while lowering total cost of ownership (TCO)
- PLUG-AND-PLAY – No configuration or software needed
DGS-F105
5 Port Gigabit Unmanaged Metal Switch F105
D-Link Ethernet Switch, 5 Port Gigabit 10/100/1000 Mbps Unmanaged Metal Switch Desktop , Plug and Play , LEDs Lights Cables Diagnostics , Compact (DGS-F105), Black 
MikroTic CRS326-24G-2S+RM 24-Port Gigabit Switch with 2 SFP+ Ports, Dual Boot (RouterOS/SwOS), ARM CPU, 512MB RAM, Passive Cooling, VLAN & MAC Filtering, 10-30V Power Input, CE Certified, 24W Max Power Consumption
24-Port Gigabit Switch w 2 SFP plus
CRS326-24G-2S+RM Features:
- Dual Boot Operating System: Choose between RouterOS for advanced routing and Layer 3 features, or SwOS for a simplified, switch-only OS with enhanced switch-specific features.
- 24 Gigabit Ethernet Ports: High-speed connectivity for all your network devices.
- 2 x SFP+ Ports: Support for both 1.25 Gb SFP and 10 Gb SFP+ modules for high-speed fiber connectivity.
- Advanced Switch Features: Includes port-to-port forwarding, VLAN configuration, MAC filtering, traffic mirroring, and bandwidth limitations.
- Simplified Management: Easily select your operating system from the RouterBOOT loader settings.
- Passive Cooling: Designed with passive cooling for quieter operation.
- Reliable Performance: Provides wire-speed connectivity with advanced features for efficient network management.
CRS326-24G-2S+RM Specifications:
- Product Code: CRS326-24G-2S+RM
- Architecture: ARM 32-bit
- CPU: 98DX3236, 1 core, 800 MHz
- RAM: 512 MB
- Storage: 16 MB FLASH
- Switch Chip Model: 98DX3236
- Dimensions: 443 x 144 x 44 mm (1U rackmount)
- RouterOS License: License 5
- Max Power Consumption: 24 W
- Cooling Type: Passive
- Power Input: 2 DC inputs (DC jack, PoE-IN), 10-30 V
- PoE Input: Passive PoE, 10-30 V
- Ethernet Ports: 24 x 10/100/1000 Gigabit Ethernet
- SFP+ Ports: 2 (Supports both 1.25 Gb and 10 Gb modules)
- Serial Console Port: RJ45
- Certifications: CE, EAC, ROHS
- Operating Temperature: -40°C to 60°C
- MTBF (Mean Time Between Failures): ~200,000 hours at 25°C
- IP Rating: IP20
Mikrotik LHG XL 52 ac RBLHGG-5HPacD2HPnD-XL 5GHz Dual-Band Backbone CPE with 27 dBi ; Extremely powerful dual-band backbone / CPE for long-distance connection without downtime
Expert Description
Need a reliable and strong long-distance connection that never goes down? The new LHG XL 52 ac also known as RBLHGG-5HPacD2HPnD-XL will provide just that with its dual-band capability. You can easily setup the 5 GHz channel as the main one with speed up to 600 Mbps and use the 2.4 GHz channel as an automatic backup connection with speed up to 260 Mbps. The powerful 27 dBi 5 GHz / 18 dBi 2.4 GHz antenna will provide connection with link distance up to 40 km. The grid design ensures protection against wind, it can withstand temperatures from -40 C° to +70 C°. Antenna element is built into the wireless unit – no loss on cables. This device can handle the heaviest loads thanks to the impressive quad-core CPU and 256 MB of RAM. It has a Gigabit Ethernet port, an SFP port, and it is 802.3af/at compliant – you can power it with the smart switches!Included parts
- 24V 1.2A power adapter
- LHG mount
- Gigabit PoE injector
Expert Specifications
-
- Architecture: ARM 32bit
- CPU: IPQ-4018
- CPU core count: 4
- CPU nominal frequency: 716 MHz
- IPsec hardware acceleration: Yes
- Dimensions: Ø 550 x 291 mm
- RouterOS license: 3
- Operating System: RouterOS
- Size of RAM: 256 MB
- Storage size: 16 MB
- Storage type: FLASH
- MTBF: Approximately 200'000 hours at 25C
- Tested ambient temperature: -40°C to 70°C
- Powering
- PoE in: 802.3af/at
- PoE in input Voltage: 12-57 V
- Number of DC inputs: 1 (PoE-IN)
- Max power consumption: 18 W
- Max power consumption without attachments: 16 W
- FAN count: Passive
- Ethernet
- 10/100/1000 Ethernet ports: 1
- Fiber
- SFP ports: 1
- Other
- PCB temperature monitor: Yes
- Voltage Monitor: Yes
- Mode button: Yes
- Certification & Approvals
- Certification: CE, FCC, IC, EAC, ROHS
Mikrotik CSS326-24G-2S+RM 24 PORT Managed Gigabit Ethernet Supports Power Over Ethernet (PoE) 1U Network Switch, 2x SFP, White
Mikrotik Managed Gigabit Switch
Rack ears
24V 1.2A power adapter
Screw set (4)
Expert Features
- Cloud Smart Switch 326-24G-2S+RM is SwOS powered 24 port Gigabit Ethernet switch with two SFP+ port
- It gives you all the basic functionality for a managed switch, plus more
- Allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields
- SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules
- International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
Other Characteristics
• Non-blocking Layer 2 switching capacity • 16K host table • IEEE 802.1Q VLAN • Supports up to 250 VLANs • Port isolation • Port security • Broadcast storm control • Port mirroring of ingress/egress traffic • Rapid Spanning Tree Protocol • Access Control List • MikroTik neighbor discovery • SNMP v1 • Web-based GUIExpert Specifications
| Details | |
|---|---|
| Product code | CSS326-24G-2S+RM |
| Switch chip model | 98DX3216 |
| Dimensions | 443 x 144 x 44 mm |
| Operating System | SwOS |
| Storage size | 2 MB |
| Storage type | FLASH |
| MTBF | Approximately 200'000 hours at 25C |
| Tested ambient temperature | -20°C to 70°C |
| Suggested price | $159.00 |
Powering
| Details | |
|---|---|
| Number of DC inputs | 2 (PoE-IN, DC jack) |
| DC jack input Voltage | 10-30 V |
| Max power consumption | 19 W |
| Cooling type | Passive |
| PoE in | Passive PoE |
| PoE in input Voltage | 10-30 V |
Ethernet
| Details | |
|---|---|
| 10/100/1000 Ethernet ports | 24 |
Fiber
| Details | |
|---|---|
| SFP+ ports | 2 |
Certification & Approvals
| Details | |
|---|---|
| Certification | CE, EAC, ROHS |
| IP | 20 |
Included parts
Rack ears
24V 1.2A power adapter
Screw set (4)
24V (1A) 10/100 mbs PoE adapter, EU type plug
This PoE injector is a simple and convenient power supply equipment for PoE or Non PoE devices via only an Ethernet cable, which will save your trouble about power line cabling and save cost.
- Power remote equipment through CAT 5 Ethernet cable up to 100M
- Autoranging switching power supply 100~240V AC
- Short circuit, over-current, and over-voltage protection
- Reliable 24W passive POE output
- Compact, portable size with convenient wall plug design
- 24V-1A Wall Plug POE Injector Ethernet Adapter IP Phone/Camera Power Supply
* The compact, wall-mountable design makes it easy to install the adapter into areas where space is limited, and can be installed in seconds with no configuration required.
Specification:
Input Voltage (AC): 100- 240Vac (nominal) Input Frequency Range: 47 Hz(min) ~ 63 Hz(max) Output Voltage (DC): 24 V (22.8-25.2) Output Rating: 1A (24W) Operating Temperature: -10°C ~ +40°C Storage Temperature: -30°C ~ +80°C Operating Humidity: 10%~95% non-condensing Storage Humidity: 10%~95% non-condensing Weight: 90 g Certification: CE
Connectors view:
GVISION 10/100/1000M Uplink Port switch poe support switch poe reverse and poe switch 8 port
1*10/100/1000M Uplink Port switch poe support switch poe reverse and poe switch 8 port
PRODUCT INTRODUCTION:
RPOE switch has intelligent device Power management features solving a major problem of powering the device for internet service provider.
This switch can be powered using remote power from customer using specially designed POE injector or any standard POE injector(24v DC,0.75amp).
This eliminates the needs of arranging power at building top (ups not require/No need to pay more money to customer or society).This saves lot of money of ISPs and improves uninterrupted service to the customer.
PRODUCT FEATURE:
REVERSE POE TECHNOLOGY:7Port 10/100+ 1G Reverse POE switch which has latest generation of fast Ethernet reverse POE switching technology. It contains 7*10/100 base T Reverse Poe ports (RPOE),1*10/100/1000 Base date Uplink Port&12V DC out for Powering ONU.
Supports Auto-Negotiation: Each of the ports automatically detect whether connected network devices are running at 10Mbps or 100Mbps (Up-link Port is 1000Mbps) and half-duplex or full-duplex mode, and adjusts the speed and mode accordingly ensuring easy and hassle-free operation.
Supports Non-blocking Wire Speed: The switch forwards and receives traffic seamlessly with its Non-blocking wire- speed. Every port of the Switch supports speeds up to 200Mbps(Up-link Port is 2000Mbps)in full-duplex mode simultaneously, providing full wire speed to connected devices and allowing you to run a high speed network smoothly.
Cascading support: switches can be cascaded for more users per Building (Up to 1 Main+3 switches )
Port base Isolation u/Hardware VLAN: The feature of Port Isolation is implemented in this unit where in the Ethernet Date of the Uplink Port can be transferred to any of the Downlink ports but the individual Downlink ports cannot communicate with each other.
Over voltage Protection: Over voltage Protection is provided on each date port to eliminate damage due to connection of higher voltage(Higher than 24V DC. Up to 30V DC). By mistake if user connect more than 24V POE injector then switch will goes on power off mode and will start working again once this high voltage source is removed.
Over current Protection: We have provided over current protection on each port to prevent damage to the switch in case of high current flowing due to any reason. This is provided using Resettable Fuse to facilitate easy maintenance and avoiding frequent change of blown fuse.
PRODUCT APPLICATION:
7*10/100 Base T Reverse POE Ports(RPOE) & 1*10/100/1000 Base T Uplink Port & 12V DC Power out for Powering ONU
PRODUCT SPECIFICTAION:
| Product | RPOE 7*10/100M+1*1000M 12V2A out |
| Ethernet Connector | RJ45 Jacks(8 Ports)10/100Base-TX with Auto-MDIX |
| 1*10/100/1000M Base T Data Uplink Port(port 1) | |
| 7*10/100 Base-Reverse POE Ports(Port 2to 8)Data + Power in | |
| standards | IEEE STD. 802.3 10BASE T 10Mbps,Half/Full Duplex IEEE STD. 802.3U 100BASE-TX,10/100Mbps,Half/Full Duplex IEEE STD.802.3X FLOW CONTROL AND BACK PRESSURE IEEE STD.802.3AZ Energy Efficient Ethernet |
| Protocols | CSMA/CD |
| Transmission Method | Store and forward |
| MAC ADDRESS | Support 8k MAC address |
| Packet Buffer | |
| Maximum Forwarding Packet Length | Supports 9216-byte jumbo packet length forwarding at wire speed |
| Filtering/Forwarding Rates | 1000Mbps Port – 148800pps 100Mbps Port – 14880pps 10Mbps Port – 14880pps |
| Network Cable | 4-pair UTP/STP Cat 5 cable |
| LEDs | Link/Activity per Ethernet port Power: On/Off for switch |
| Power Over Ethernet injector: Power Supply(IN) | Power over Ethernet 24V @ 18W on SPARE pair ( to supply power to the HDV switch as well as a compatible POE device(e.g. CPE) |
| No. of Ethernet Ports that can Power On the Switch & ONU | Any one /all of the seven Downlink Ports |
| Power Over Ethernet | Power over Ethernet injector on Four Pair Cable |
| DC Out | 12V/2A DC OUT THROUGH DC jack for powering other Device like ONU |
| Ethernet Devices that can be powered | Single |
| CAT-5 Cable Date Lines | Pair 1:Pins 1/2,Pair 2:Pins3/6 |
| CAT-5 Cable Power Lines | +VDC: Pins 4/5,-VDC:Pins 7/8 |
| Power consumption | 5 Watt (Poe injector) / 2 Watt (Switch) |
| Operating Temperature | 0℃to 50℃ |
| Storage environment | 0℃ to 75℃ |
| Operating Humidity | 20% to 95% (non-condensing) |
| Dimension of Switch | 125mm*70mm*25mm |
| Weight of Switch | 0.45KG |
HAP LITE MIKROTIK RB941
- The home Access Point lite (hAP lite TC) also known as RB941-2nD is an ideal little device for your apartment, house or office
- It supports button triggered WPS, for the convenience of not typing a complicated password when somebody wants to have wireless internet access
- The device runs RouterOS with all the features, bandwidth shaping, firewall, user access control and many others
- The hAP lite TC is equipped with a powerful 650MHz CPU, 32MB RAM, dual chain 2.4GHz onboard wireless, four Fast Ethernet ports and a RouterOS L4 license. USB power supply is included
- CPU: QCA9533; Storage size: 16 MB; Wireless 2.4 GHz standards: 802.11b/g/n; Antenna gain dBi for 2.4 GHz: 1.5; Tested ambient temperature: -20°C to 70°C
KVM Switch HDMI 4 port Boxes, 4K@30hz USB KVM HDMI Console for 4 Computers sharing Keyboard Mouse and HD Monitor with 4 pack – 2in1 KVM Cables + Desktop Selector Included
KVM Switch HDMI 4 port Boxes
| Operation mode | Manual |
| Contact type | Normally Open |
| Connector type | hdmi,usb |
| Brand | MT-VIKI |
| Item dimensions L x W x H | 11 x 6 x 1 centimetres |
| Circuit type | 2-way |
| International protection rating | IP54 |
| Controller type | Push Button |
| Control method | Remote |
| Connectivity protocol | Bluetooth |
|
|
Expert Features
4 port KVM switch HDMI
- Allows you to control 4 computers by only 1 set( monitor, keyboard, mouse).
- It can also share USB speaker, U disk or printer and USB 2.0 devices).
- Also support Bluetooth keyboard & mouse with a USB receiver, 3D & EDID.
Compatibility:
- This kvm switch 4 computers supports plug and play, no software required.
- Driver-free for Windows 11/10/8/8.1/7/Vista/XP and Mac OS, Linux.
Package includes:
- 1x KVM hdmi switch 4 ports, 1x Desktop selector, 1x Manual, 4 x special USB and HDMI cable (2in1, 4ft/1.2m), which makes your desk no more mess .
- Please plug the special HDMI cable/ USB pigtail into computer port.
Includes:
- Four 2in1 professional hdmi/usb KVM cables included, no cable mess up.
- Two switch options: extended desktop selector & pannel button.
- 4 port KVM switch x1 pcs
- MT-HK04
- 1.5M KVM cable x4 pcs
- Desktop controller x1 set
- User manual x1.
FROM THE MANUFACTURER
4 ports KVM switch with USB port for sharing 1 printer
- ►Upgrade1: MT-HK04 HDMI KVM switcher with wired desktop control (Switching by Button or Desktop control). Built with additional USB Hub.
- ►Upgrade2: the only one to come with 2in1 HDMI KVM cable, not 2 separated cables, no worry for cables mess.
- ►Plug and play, support hot-plug
- ►Upgrade3: Resolution up to 4K @30Hz/ 3840*2160, support 3D,1080P. And EDID storage switch, make sure the best transmission.
- ► Compatible with: Dos, Win3.X/ Win98/ 98SE/ 2000/ ME/ 2003/ 2008/ XP/ IOS/ MAC, Win7/ Win8/ WinNT/ Netware/ Unix/ Linux, applicable to XBox 360, XBox One, PS3 / PS4, Blu-Ray DVD player, TV, Route Roku.
- ►Packing: 4 port KVM switch x1 pcs, MT-HK04，1.5M KVM cable x4 pcs, Desktop controllerx1 set, User manual x1. (If wanna get longer cable please search ASIN: B09KTLMHK7 )
HDMI KVM Switch 4K 30Hz
This product is a compact 4-port KVM switch that lets you access and control 4 desktop, laptop or netbook computers. You can share a single USB keyboard, USB mouse and HDMI monitor with both systems, saving space on your desk and using your preferred display, keyboard and mouse with both computers.Features
- Support USB2.0 for any device EDID storage switch, make sure the best transmission
- Support super widescreen display
- Support Microsoft smart mouse Logitech network mouse
- Compatible with Windows series, Mac OS. Linux system
- Excellent image quality, resolution up to 3840*2160/30Hz
- Switching mode: panel switch, desktop controller Under normal operation of the computer, no need to turn off KVM switch and computer to plug or unplug the connected computer Used for online games, hard disk video recorder, computer room server, Mini MAC
Linksys LGS108 8-Port Business Desktop Gigabit Switch SKU LGS108
MIKROTIK ETHERNET ROUTER L009UIGS-RM
MIKROTIK Ethernet Router L009UiGS-RM
1x SFP port (2.5G supported) | 8x Gigabit LAN ports (Ether8 has Passive PoE out) | 1x Serial console port (RJ45) | 1x Full size USB 3.0 type A | 2 core CPU | Can be powered in 2 different ways (DC jack, PoE-IN) | RouterOS (Licence level 5)
L009UiGS-RML009 is more than just a router. This product line is up to 4 times faster than RB2011, it has a modern ARM CPU with container support, an innovative enclosure that allows mounting up to four routers in a single 1U space, more RAM, PoE, and 2.5G SFP support. This version comes with 1U rackmount accessories.
The legendary RB2011 product line has provided affordable, flexible, and robust connectivity for over a decade. In fact, it was our very first router with SFP. Finally, it’s time for an upgrade. But don’t worry: we’ve kept and improved all the key elements and features of the beloved RB2011. Even the red color scheme and the appealing price!
Included in the box
- 1x L009UiGS-RM
- 1x 24V 1.5A power supply
- 1x Fastening set K-52
- 1x Rackmount kit K-79
Specifications
Interfaces
RJ45 Ports
(8) 1 Gbps
Number of PoE Ports
1 pcs
PoE Out Standards
Passive PoE
SFP Ports
(1) 1G SFP
USB Ports
(1) USB-A 3.0
System Specification
Chipset
Dual-Core IPQ-5018 800 MHz
RAM
512 MB
Storage Memory
128 MB
Power
Power Method
AC/DC Adapter, 802.3af PoE
Power Supply
External AC/DC Adapter
Supported Input Voltage
24 - 56 V DC
Max Power Consumption
37 W
PSU / POE adapter
24 V DC 1.5 A
Physical Parameters
Dimensions
220 x 125 x 22 mm
Operating Temperature
-40 °C to 70 °C
Package Contains
External Power Supply
Included
Software
MikroTik
RouterOS Level 5
NETIS SWITCH 8 PORT 10/100MBPS ST-3108
SW-NETIS-8PORT
NETIS SWITCH 8 PORT 10/100MBPS ST-3108
Product Description
Eight (8) 10/100Mbps RJ45 ports, Auto-Negotiation & Auto MDI/ MDIX IEEE 802.3x flow control for Full Duplex mode and back pressure for Half Duplex mode 1.6Gbps switching fabric capacity/backplane bandwidth Green Ethernet technology for effective power saving LED indicators for simple diagnostics and management Plug and play, no configuration required Compact plastic case, desktop design for home and office use Interface: 8* 10/100M TX ports LED: PWR, 1-8 Cabling Type 10Base-T:UTP Cat.3 or up, 100Base-TX:UTP Cat.5 or up Standard: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX,IEEE802.3ab 1000Base-T Access Method: CSMA/CD Transmission Method: Store and Forward Data Transmission Rate: 10/100Mbps(Half-duplex), 20/200Mbps(Full-duplex) MAC Address Table: 1K Operating Temperature: 0-40C Storage Temperature: -40, 70C Operating Humidity: 10%-90%RH non-condensing Storage Humidity: 5%-90%RH non-condensing Input: 100-240V 0.2A 50/60HZ Output:DC 9V/500mA
TL-SG1210P 10-Port Gigabit Desktop Switch with 8-Port PoE+
TL-SG1210P 10-Port Gigabit Desktop Switch with 8-Port PoE+
- 9 10/100/1000Mbps RJ45 ports, 1 Gigabit SFP port
- With 8 PoE+ ports, transfers data and power on one single cable
- Works with IEEE 802.3af/at compliant PDs and expands office network
- 802.1p/DSCP QoS enable smooth latency-sensitive traffic
- High PoE power budget with up to 30W for each PoE port and 63W for all PoE ports
- Easy to use, with no configuration and installation needed
HARDWARE FEATURES |
|
|---|---|
| Interface | 8 PoE+ 10/100/1000Mbps RJ45 Ports 1 10/100/1000Mbps RJ45 Port 1 Gigabit SFP Slot |
Network Media |
|
| Fan Quantity | Fanless |
| Physical Security Lock | Yes |
| Power Supply | External Power Adapter(Output: 53.5VDC / 1.31A) |
| Packet Forwarding Rate | 14.88 Mpps |
PoE+ Ports(RJ45) |
|
| Mac Address Table | 4K |
| Jumbo Frame | 16 KB |
| Switching Capacity | 20 Gbps |
| Dimensions ( W x D x H ) | 209 × 126 × 26 mm |
| Max Power Consumption |
|
Max Heat Dissipation |
|
SOFTWARE FEATURES |
|
|---|---|
| Advanced Features | Compatible With IEEE 802.3af/at Compliant PDs EEE802.3x Flow Control 802.1p/DSCP QoS IGMP Snooping |
| Transmission Method | Store-And-Forward |
OTHERS |
|
|---|---|
| Certification | CE, FCC, RoHS |
Package Contents |
TL-SG1210P, Power Adapter, Installation Guide |
| Environment | Operating Temperature: 0°C~40°C (32°F~104°F) Storage Temperature: -40°C~70°C (-40°F~158°F) Operating Humidity: 10% ~ 90% non-condensing Storage Humidity: 5%~90% non-condensing |
TP LINK JETSTREAM 16-PORT GIGABIT SMART SWITCH WITH 2 SFP SLOTS
TL-SG2218
JetStream 16-Port Gigabit Smart Switch with 2 SFP Slots
- Full Gigabit Ports: 16× gigabit RJ45 ports and 2× gigabit SFP Slots provide high-speed connections.
- Integrated into Omada SDN: Zero-Touch Provisioning (ZTP)*, Centralized Cloud Management, and Intelligent Monitoring.
- Centralized Management: Cloud access and Omada app for ultra convenience and easy management.
- Static Routing: Helps route internal traffic for more efficient use of network resources.
- Robust Security Strategies: IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X, Radius Authentication, and more.
- Optimize Voice and Video Applications: L2/L3/L4 QoS and IGMP snooping.
| HARDWARE FEATURES | |
|---|---|
| Interface | • 16× 10/100/1000 Mbps RJ45 Ports • 2× Gigabit SFP Slots |
| Fan Quantity | Fanless |
| Power Supply | 100-240 V AC~50/60 Hz |
| Dimensions ( W x D x H ) | 17.3 × 7.1 × 1.7 in. (440 × 180 × 44 mm) |
| Mounting | Rack Mountable |
| Max Power Consumption | 12.3 W |
| Max Heat Dissipation | 42.0 BTU/hr |
| PERFORMANCE | |
|---|---|
| Switching Capacity | 36 Gbps |
| Packet Forwarding Rate | 26.8 Mpps |
| MAC Address Table | 8K |
| Jumbo Frame | 9 KB |
| SOFTWARE FEATURES | |
|---|---|
| Quality of Service | • 8 priority queues • 802.1p CoS/DSCP priority • Queue scheduling - SP (Strict Priority) - WRR (Weighted Round Robin) - SP+WRR • Bandwidth Control - Port/Flow based Rating Limiting • Smoother Performance • Action for Flows - Mirror (to supported interface) - Redirect (to supported interface) - Rate Limit - QoS Remark |
| L2 and L2+ Features | • Link Aggregation - Static link aggregation - 802.3ad LACP - Up to 8 aggregation groups and up to 8 ports per group • Spanning Tree Protocol - 802.1d STP - 802.1w RSTP - 802.1s MSTP - STP Security: TC Protect, BPDU Filter, BPDU Protect, Root Protect, Loop Protect • Loopback Detection - Port-based - VLAN based • Flow Control - 802.3x Flow Control - HOL Blocking Prevention • Mirroring - Port Mirroring - CPU Mirroring - One-to-One - Many-to-One - Tx/Rx/Both |
| L2 Multicast | • Supports 511 (IPv4, IPv6) IGMP groups • IGMP Snooping - IGMP v1/v2/v3 Snooping - Fast Leave - IGMP Snooping Querier - IGMP Authentication • IGMP Authentication • MVR • MLD Snooping - MLD v1/v2 Snooping - Fast Leave - MLD Snooping Querier - Static Group Config - Limited IP Multicast • Multicast Filtering: 256 profiles and 16 entries per profile |
| VLAN | • VLAN Group - Max 4K VLAN Groups • 802.1q Tagged VLAN • MAC VLAN: 12 Entries • Protocol VLAN: Protocol Template 16, Protocol VLAN 16 • GVRP • VLAN VPN (QinQ) - Port-Based QinQ - Selective QinQ • Voice VLAN |
| Access Control List | • Time-based ACL • MAC ACL - Source MAC - Destination MAC - VLAN ID - User Priority - Ether Type • IP ACL - Source IP - Destination IP - Fragment - IP Protocol - TCP Flag - TCP/UDP Port - DSCP/IP TOS - User Priority • Combined ACL • Packet Content ACL • IPv6 ACL • Policy - Mirroring - Redirect - Rate Limit - QoS Remark • ACL apply to Port/VLAN |
TP-Link 10-Port Gigabit Desktop Switch with 8-Port PoE+, 61 W PoE Budget, 30 W PoE output, Up to 250m PoE Transmission. Traffic Separation, Plug and Play, Fanless, Metal Case (LS1210GP)
10-Port Gigabit Desktop Switch 8-Port PoE+
EXPERT FEATURES
- Full Gigabit Ports: 9× gigabit auto-negotiation RJ45 Ethernet ports and 1× gigabit SFP port provide up to 20 Gbps switching capacity
- 61 W PoE Budget: Eight gigabit 802.3af/at-compliant PoE+ ports easily connect and power fixed devices like IP cameras, access points, and IP phones via a single cable; Up to 30 W PoE output is supported by each PoE port
- Up to 250 m PoE Transmission: With Extend Mode, PoE transmission distance reaches up to 250m, perfect for surveillance camera deployment in large areas
- PoE Auto Recovery: Automatically reboots your dropped or unresponsive PoE-powered devices
- Traffic Separation for Higher Security: Isolation Mode allows one-click client traffic separation to avoid snooping and tampering, and isolate broadcast storm
- Plug and Play: Simply plug and play for instant connectivity with no configuration required
- Silent Operation: Fanless design reduces power consumption and ensures silent operation, ideal for noise-sensitive homes or businesses
- Reliable Hardware Design: Durable metal casing and desktop/wall-mounting design are well-suited for different environments
TP-Link 5-Port Gigabit Desktop Switch with 4-Port PoE+, up to 10 Gbps switching capacity, 65 W PoE Budget up to 250 m Transmission, desktop or wall-mounting design, Plug and play, metal case(LS105GP)
5-Port Gigabit Desktop Switch 4-Port PoE
EXPERT FEATURES
- Full Gigabit Ports: Five gigabit augo-negotiation ports provide up to 10 Gbps switching capacity
- 65 W PoE Budget: Four gigabit 802.3af/at-compliant PoE+ ports easily connect and power fixed devices like IP cameras, access points, and IP phones via a single cable. Up to 30 W PoE output is supported by each PoE port
- Up to 250 m PoE Transmission: With Extend Mode, PoE transmission distance reaches up to 250m, perfect for surveillance camera deployment in large areas
- PoE Auto Recovery: Automatically reboots your dropped or unresponsive PoE-powered devices
- Plug and Play: Simply plug and play for instant connectivity with no configuration required
- Silent Operation: Fanless design reduces power consumption and ensures silent operation, ideal for noise-sensitive homes or businesses
- Reliable Hardware Design: Durable metal casing and desktop/wall-mounting design are well-suited for different environments
TP-Link 8 Port Gigabit Switch Smart Managed TL-SG108E
TP-Link OC200 | Omada SDN-Hardware Cloud Controller POE
TP-Link TAPO P100(2-PACK) smart plug
From the manufacturer
Control Your Appliances Anytime, Anywhere.
Take control of your home with the friendly Tapo app. Instantly turn on/off your connected small appliances wherever you are, making your life easier while simultaneously controlling your energy bill and eliminating potential safety hazards.
Schedule Life Smarter
Create scheduled activities and countdown timers to automate your home. All of your connected electronics will automatically turn on/off based on your preset times, making your life smarter and more convenient while being energy efficient.
Multi-User Control
Share access with the whole family. Tapo allows you to grant others the ability to control the plug, even when you're not home, using their own device.
Fast and Easy Setup
Setup is made easy with Bluetooth onboarding. Simply download the free Tapo app, plug in your P100 smart plug, and follow the on-screen directions. [1]
TP-Link TL-SG1008MP V2 | 8 Port Gigabit PoE Switch | 8 PoE
- Flexible Full Gigabit 8-Port PoE Configuration - 8x PoE+ (802.3at/af) 10/100/1000 Mbps RJ45 ports providing up to 30W per port and total PoE power budget of153W.
- Plug and Play - Easy setup with no software installation or configuration needed.
- Overload Protection with Port Priority - When connected devices’ total power consumption is greater than or equal to 153W, lower priority ports are disabled to prevent overloading.
- Sturdy Metal Case - Durable metal casing and desktop/rackmount design are well-suited for different environments.
- Reliable Data Transfer - IEEE 802.3X flow control provides reliable data transfer.
TP-Link TL-SG116 16-Port Gigabit Desktop Switch
Description
TP-Link TL-SG116 16-Port Gigabit Desktop Switch
TP-Link TL-SG116 16-Port Gigabit Desktop Switch comes with 16 10/100/1000Mbps Auto-Negotiation RJ45 ports supporting Auto-MDI/MDIX. It provides you with an easy way to increase the speed of your network server and backbone connections. The TP-Link TL-SG116 comes with a plug-and-play design that makes for easy deployment without the need for a technician. It features auto-negotiation on each port that senses the link speed of a network device and intelligently adjusts for compatibility and optimal performance. All 16 ports enable the instant transferring of large, bandwidth-intensive files without interference. The TP-Link TL-SG116 comes with Green Ethernet technology saves power consumption. Power consumption automatically adjusts according to the link status and cable length, allowing you to expand your network while minimizing your carbon footprint. It has a steel housing, desktop, or wall-mounting design and it offers plug-and-play, with no configuration needed.
TP-Link TL-SG2428P JetStream 28-Port Gigabit Smart Switch, 24 PoE+ Ports
TL-SG2428P
JetStream 28-Port Gigabit Smart Switch with 24-Port PoE+
- 250 W PoE Budget: 24× 802.3at/af-compliant PoE+ ports with a total power supply of 250 W*.
- Full Gigabit Ports: 24× gigabit PoE+ ports and 4× gigabit SFP Slots provide high-speed connections.
- Integrated into Omada SDN: Zero-Touch Provisioning (ZTP)**, Centralized Cloud Management, and Intelligent Monitoring.
- Centralized Management: Cloud access and Omada app for ultra convenience and easy management.
- Static Routing: Helps route internal traffic for more efficient use of network resources.
- Robust Security Strategies: IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X, Radius Authentication, and more.
- Optimize Voice and Video Applications: L2/L3/L4 QoS and IGMP snooping.
- IPv6: IPv6 support with dual IPv4/IPv6 stack, MLD snooping, IPv6 neighbor discovery.
