| VEIKK , A50 , DRAWING , TABLET , 10 |
{attribute:VEIKK , A50 , DRAWING , TABLET , 10 |
|---|
-8%
NZXT H Series H5 Flow RGB Edition ATX Mid Tower Chassis Black Color
Original price was: $ 119.00.$ 109.00Current price is: $ 109.00.
Additional information
Related products
Table Stand Desk for LED, LCD, Plasma TV 13” to 27” – MS03
• Table Stand Desk fits most 13'' to 27'' displays
• Articulating stand with Swivel 180° and Tilt angle ±15°
• Supports load from 9 to 20 kg
• Mounting VESA compliance 50 x 50 mm, 75 x 75 mm & VESA 100 x 100mm
• Carton Size: 445 x 130 x 100 mm
• Gross Weight: 2.85 kg
• Net Weight: 2.55 kg
• Color: Black
MSI GEFORCE RTX 3070 VENTUS 3X OC “USED – WITH BOX”
MSI-VENTUS-3070-USED
MSI GEFORCE RTX 3070 VENTUS 3X OC USED NO WARRANTY
| General | |
|---|---|
| Device type | Graphic card |
| Graphics engine | NVIDIA GeForce RTX 3070 |
| Bus type | PCI Express 4.0 |
| interfaces | 3x DisplayPort HDMI |
| Supported APIs | DirectX 12, OpenGL 4.6 |
| Functions | NVIDIA Adaptive Vertical Sync, NVIDIA G-Sync support, MSI Zero Frozr technology, Torx 3.0 Fans, Tri-fan design, NVIDIA Ampere GPU technology, Core Pipe, LHR (Lite Hash Rate), 2nd gen Ray Tracing Cores, 3rd gen Tensor Cores, HDCP |
| Main clock | 1755MHz |
| CUDA kernels | 5888 |
| Maximum resolution | 7680x4320 |
| Maximum number of monitors | 4 |
| Ready for virtual reality | Yes |
| Memory | |
| Technology | GDDR6 SDRAM |
| Bus width | 256-bit |
| Size | 8 GB |
| Memory speed | 14 Gbps |
| Required configuration | |
| Power Requirements | 650W |
| Additional requirements | 2 x 8-pin PCI Express power connectors |
RAM ADATA 4GB DDR4 2666 DESKTOP
Product Specification
| Memory | 4 GB |
| Brand | ADATA |
| Warranty | 3 Years Limited Warranty |
| Minimum Order Quantity | 1 Nos |
Product Description
ADATA Premier Memory 4GB DDR4 2666Mhz RAM for Desktop
ADATA Premier DDR4 2666 unbuffered-DIMM memory is the latest upgrade solution that supports Intel's newest platforms for faster data transfer and enhanced power efficiency. Utilizing a 288-pin design, operating voltage has been reduced from 1.5V on DDR3 to 1.2V, which not only helps save power by 20%, but also boosts transfer bandwidth speed to 21.3GB/s. Every chip in ADATA memory modules meets strict JEDEC and RoHS standards, ensuring compatibility, stability, and environmentally friendly products. All ADATA memory modules are produced and tested using a rigorous quality control process for rapid computing and stable operation. In addition, ADATA memory modules provide customers a lifetime warranty for maximum assurance with excellent service.
GAMDIAS ATHENA M6 LITE , ATX Mid Tower Gaming Case with Side Tempered Glass, 4X 120mm ARGB Case Fans , Magnetic Dust Filter – BLACK
ATHENA M6 LITE GAMING CASE BLACK
GAMDIAS ATHENA M6 LITE , ATX Mid Tower Gaming Case with Side Tempered Glass, 4X 120mm ARGB Case Fans and Sync with 5V RGB Motherboard ,Mesh Front Panel , Perforated Chassis , Magnetic Dust Filter
-
Immersive Underglowing RGB Gaming Experience:
-
The Best Air Flow Gaming Cases:
-
Easy and Clean Cable Management:
-
Great Expandability for Your System Config.:
- ONE CLICK. SYNC ALL:
Expert Specs :
- Case Type : MID Tower
- MB Support : ATX、Micro-ATX、Mini-ITX
- Synchronization : 5V 3-Pin Addressable Header
- CASE Color : Black
- Expansion Slots : 7
- Material : SPCC & ABS & Tempered glass
- Window : Left
- Radiator Support : Top: 240mm / Front: 360mm、280mm、240mm / Rear: 120mm、140mm
- Fan Support : Top: 2 x 120mm 、2 x 140mm / Front: 3 x 120mm、2 x 140mm/ Rear: 1 x 120mm / 1 x 140mm
- Pre-installed Fans : Front: 3 x 120mm ARGB Fans/ Rear: 1 x 120mm ARGB Fan
- Drive Bays : 2 x 3.5" or 1 x 2.5"+1 x 3.5"(HDD Cage) / 2 x 2.5"
- I/O Port : USB 3.0 x1、USB 2.0 x2、HD Audio x1、LED control x1
- Clearance : CPU cooler height limitation: 190mm VGA length limitation: 340mm PSU length limitation: 180mm
- Dimension (L x W x H)410 x 230 x 477 mm
- Net Weight5.89 kg / 12.99 lb
FROM THE MANUFACTURER :
ATHENA M6 LITE GAMING CASE BLACK
UNRESTRICTIVE BRILLIANCE- Sync with Motherboard
- Triple-sided Underglow
- 4 Built-in 120mm ARGB Fans
- Seamless Tempered Glass Window
- Mesh Front Panel
- Perforated Chassis
- Magnetic Dust Filter
UNRESTRICTIVE BRILLIANCE
ATHENA M6 LITE is a mid-tower case with a unique lighting profile focused on optimizing airflow performance. The case features a panoramic mesh front panel, four built-in 120mm ARGB fans, and triple-sided ARGB light strips to leverage airflow performance and create ambient underglow lighting effects.EXTENSIVE MESH PANEL
The ATHENA M6 LITE comes with a pillar-shaped mesh front panel with room for three 120mm RGB fans, implemented with all-around perforated ventilation. The case is designed to create an environment with unrestrictive airflow to meet next-generation cooling demands.HEIGHTENED AIRFLOW
The lower compartment of the chassis takes on a perforated design with the elevated case stands allowing massive air intake and exhaust on all sides of the case.3+1 ARGB FANS
The case is preinstalled with four high-performance hydraulic ARGB fans to create a synchronized setup while enhancing air intake and exhaust.SYNCHRONIZE AND DISPLAY
The ATHENA M6 LITE supports system-wide ARGB to compatible motherboards with lighting synchronization that controls the 4 built-in ARGB fans and 3 ARGB light strips with a single push of a button.SIMPLE AND ACCESSIBLE
The I/O is equipped at the top front of the case, featuring 2x USB port, 1x USB 3.0 port, LED lighting controls, and additional audio connectivity.COOLING SUPPORT
The case supports up to 6 fans and up to a 360mm radiator in the front and 240mm at the top.INTERIOR ACCOMMODATION
The ATHENA M6 LITE supports up to ATX motherboards and VGA cards with lengths up to 340mm.OUT OF SIGHT, OUT OF MIND.
The hidden compartment has ample room for cable management optimization, and accommodates PSU lengths up to 180mm.BRILLIANT AND CONCISE
The ATHENA M6 LITE focuses on high airflow and ARGB appearance with a mesh front panel, 4 ARGB fans, and triple underglow light strips. It also comes with dust filters on the top and bottom of the case to clean out dust easier than ever.
Intel Core i5 13400 2.5GHz 1.80 GHz · 4.60 GHz “TRAY”
Intel Core i5-13400 Desktop Processor
Intel – Core i5-13400 13th Gen 10 core 6 P-cores + 4 E-cores, 20MB Cache, 2.5 to 4.6 GHz Desktop Processor " TRAY NO BOX & FAN"
Product Collection |
13th Generation Intel® Core™ i5 Processors |
Code Name |
Products formerly Raptor Lake |
Vertical Segment |
Desktop |
Processor Number |
i5-13400 |
Lithography |
Intel 7 |
Use Conditions |
PC/Client/Tablet |
CPU Specifications |
|
Total Cores |
10 |
# of Performance-cores |
6 |
# of Efficient-cores |
4 |
Total Threads |
16 |
Max Turbo Frequency |
4.60 GHz |
Performance-core Max Turbo Frequency |
4.60 GHz |
Efficient-core Max Turbo Frequency |
3.30 GHz |
Performance-core Base Frequency |
2.50 GHz |
- 10 cores (6 P-cores + 4 E-cores) and 16 threads. Integrated Intel UHD Graphics 770 included
- Performance hybrid architecture integrates two core microarchitectures, prioritizing and distributing workloads to optimize performance
- Up to 4.6 GHz. 20M Cache
- Compatible with Intel 600 series and 700 series chipset-based motherboards
DeepCool CC360 ARGB Mid-Tower ATX Gaming PC Case, 4X Pre-Installed 120mm LED Fans, Tempered Glass Side Panel, Black
DeepCool CC360 ARGB Mid-Tower PC Case
Expert Features
- The CC360 M-ATX case offers new and experienced builders a perfect start with great component compatibility and high-quality features.
- 3 120mm ARGB fans, an airflow front panel, and a mesh top panel, the CC360 provides excellent airflow through the entire chassis.
- Enough space to support high-performance AIO liquid coolers with room for a 360mm radiator in front or a 240mm radiator on top.
- Cooling fan support for up to 6x 120mm or 4x 140mm.
- Install up to 2x 2.5” SSDs directly on the backplate & 2x 3.5” HDDs in a removable drive cage .
- Easily access USB3.0, USB 2.0, and audio ports from the front I/O panel. Supports cpu coolers up to 165mm, GPUs up to 320mm, and PSUs up to 170mm.
Expert Features
ProductDimensions |
418×215×431mm(L×W×H) |
| Net Weight | 4.9Kg |
| Materials | ABS+SPCC+Tempered Glass |
| Motherboard Support | Mini-ITX / Micro-ATX |
| Front I/O Ports | USB3.0×1、USB2.0×1、Audio×1 |
| 3.5" Drive Bays | 2 |
| 2.5" Drive Bays | 2+1 |
| Expansion Slots | 4 Slots |
| Pre-Installed Fans | Front: 2×120mm Rear: 1×120mm |
Fan Support |
Front: 3×120 / 2×140mm Top: 2×120 / 2×140mm Rear: 1×120mm PSU Shrouded: 2×120mm |
| Radiator Support | Front: 120/140/240/280/360mm Top: 120/140/240mm Rear: 120mm |
| CPU Cooler Height Limit | 165mm |
| GPU Length Limit | 320mm |
| Power Supply Type | ATX PS2 （maximum length: 160mm） |
| EAN | 6933412774976 |
| P/N | R-CC360-BKAPM3-G-1 |
