VEIKK , A50 , DRAWING , TABLET , 10 |
{attribute:VEIKK , A50 , DRAWING , TABLET , 10 |
---|
NZXT H6 FLOW RGB Compact Dual-Chamber Mid-Tower Airflow Case, White, CC-H61FW-R1
$ 152.00
SKU:
CC-H61FW-R1
Categories: Computer Cases, COMPUTER PARTS
Additional information
Related products
PCIe Riser Mining Card,Awakingdemi NGFF M.2 to USB 3.0
$ 4.00
- he main control board uses the direct power supply mode of PCI-E interface, and does not need to connect the power line again
- The card slot is imported to ensure a better connection.
- A high quality connector is used for the card slot to make the card contact well.
- Multi layer shielded wire for PCI-E connector.
- The PCI-E connector is relatively wear-resistant and increases electrical conductivity.
Mouschi 8GB DDR3/DDR3L 1600MHz PC3L-12800 (PC3-12800) CL11 SODIMM 2Rx8 1.35V 204-Pin Non-ECC SO-DIMM Laptop, Notebook RAM Memory Module
$ 22.00
1600MHz 8GB Notebook RAM Memory Low Voltage
Expert Features
- Mouschi Memory RAM upgrade compatible for select Laptop, Notebook, and All-in-One (AIO) computers
- Single 8 GB Module; DDR3/DDR3L SO-DIMM 204-Pin; Speeds up to 1600 MHz, PC3L-12800/PC3L-12800S (PC3-12800/PC3-12800S)
- NON-ECC Unbuffered; 2Rx8 (Dual Rank); JEDEC DDR3L standard 1.35V (Dual voltage, can operate at 1.35V or 1.5V)
- Expands your system's available Memory RAM resource, improving performance, speed and allowing you to take on more while maintaining a smooth experience
- Quick and easy to install, no expertise required (Please refer to your system's manual for seating and channel guidelines)
- All Mouschi memory modules undergo stringent quality control testing to ensure dependable and reliable performance
- Backed by Mouschi's Limited 1 YEAR Warranty + Tech Support Team available to help before and after your purchase
Expert Specifications
Memory Type | DDR3/DDR3L |
Form Factor | SODIMM (204-Pin) |
ECC Type | Non-ECC Unbuffered |
Speed | 1600MHz, PC3L-12800 (PC3L-12800S) |
Voltage | 1.35V (JEDEC Standard DDR3 Low Voltage) |
Compatible Platforms | Laptop, Notebook, Mini PC, and All-in-One (AIO) systems compatible with 204-Pin DDR3 SODIMM Modules. (Please refer to your system's manual to ensure compatibility) |
Cooler Master ARGB 1-to-5 Splitter 3-Pin LED Connector
$ 10.00
NOTE: IT APPLIES TO 3-PIN ARGB HEADER, NOT 4-PIN
TOTAL LENGTH 58CM MEETS YOUR VARIOUS NEEDS
COMPATIBLE WITH ASUS, MSI, GIGABYTE AND ASROCK ADDRESSABLE RGB MOTHERBOARDS
-
Cooler Master 1-to-5 Addressable RGB Splitter Cable Universal 3-pin ARGB Sync on LED Strips and Fans for Computer Cases, CPU Coolers and Radiators Fans
- MFX-AWHN-1NNN5-R1
- PROFILE
- Addressable RGB
- LENGTH
- 58cm / 22.83 inch
- CONNECTOR
- 3-Pin
- RATED VOLTAGE
- 5V
- COOLER TYPE
- RGB Accessories
EAN | UPC |
4719512088937 | 884102061387 |
ASUS TUF Gaming GT301 ATX mid-tower compact PC case WITH 4 ARGB FANS – BLACK
$ 108.00
ASUS TUF Gaming ATX PC CASE
ASUS TUF Gaming GT301 Mid-Tower Compact Case for ATX Motherboards with honeycomb Front Panel, 120mm AURA Addressable RBG fans, headphone hanger, and 360mm radiator support, 2 x USB 3.2
EXPERT FEATURES
- Stylishly design: Perforated honeycomb front panel to aid airflow and features a tempered-glass side panel to showcase your build’s internals in the compact case.
- Efficient cooling: Equipped with three 120mm Aura Sync addressable RGB-illuminated fans and one 120mm rear fan, plus up to six fan-mounting points for targeted airflow.
- Space reserved for 280/360mm water-cooling radiators in front and 120mm at rear
- Integrated 6 ports Aura Sync addressable-RGB controller hub and a dedicated front panel control button to create a stunning lighting effect
- Extensive storage options: up to 2 HDD (trays included) and 6x SDD (2x dedicated bracket included, one is on the power supply shroud) mounting locations
- Combat-ready: Customized headphone hook which can be hanged on both sides
Model
TUF Gaming GT301
Case Size
Mid Tower
Motherboard Support
ATX
Drive Bays
4 x 2.5" Bay
2 x 2.5"/3.5" Combo Bay
Expansion Slots
7
Front I/O Port
1 x Headphone
1 x Microphone
2 x USB 3.1 Gen1
LED Control Button
Reset Button
Tempered Glass
Left Side
Radiator Support (Front)
120 mm
140 mm
240 mm
280 mm
360 mm
Radiator Support (Rear)
120 mm
Cooling Support (Front)
3 x 120 mm
2 x 140 mm
Cooling Support (Top)
2 x 120 mm
Cooling Support (Rear)
1 x 120 mm
Pre-installed Fans (Front)
3 x 120 mm
ARGB
Pre-installed Fans (Rear)
1 x 120 mm
Maximum CPU Cooler Height
160 mm
Maximum GPU Length
320 mm
Maximum PSU Length
160 mm
Removable Dust Filters
Front
Top
Bottom
Maximum Cable Management Space
30 mm
Dimensions
426 x 214 x 482 mm (L x W x H)
Weight
7.2 Kg
AURA Sync
ARGB
Xigmatek LIQUID-KILLER X 360 ARGB AIO CPU Cooler
Optimized cooling with Xigmatek
AN INGENIOUS COOLING SYSTEM
The 120mm Xigmatek fans in this watercooling kit are equipped with a hydraulic bearing that allows for quiet operation and a very good durability. The pump, made of ceramic, is also very resistant and the special motor allows a very high flow rate without being very noisy. Thanks to the pure copper cooling plate, the captured heat is efficiently removed and will keep your processor in perfect working order even under heavy use. The radiator has aluminium water channels that help dissipate the stored heat. Finally, the 400 mm long tube is fully sheathed. This model is also compatible with AMD AM4/TR4 and Intel LGA 1700 sockets.LIGHT UP YOUR CASE
The fans feature ARGB LEDs that can be dimmed in 7 different modes for added fun! In addition, a controller allows connection and setting of the lighting, as well as synchronization with additional fans or other components with compatible ARGB backlighting. Using the included remote control, you can also vary the backlight, fan speed or enable and disable sync with the motherboard remotely and easily.MAIN FEATURES :
- All-in-one watercooling system for processor
- Processor compatibility: Intel LGA 20xx/1700/1200/115x - AMD TR4/AM4/AM3+/AM3
- Fans: 3 x 120 mm ARGB / 1800 rpm maximum / < 25.3 dB(A) / 82.2 CFM
- Light controller and remote control included
- Heater material: Aluminium
- Hose length: 400 mm
- Fan dimensions: 120 x 120 x 25 mm
- Heater dimensions: 394 x 120 x 27 mm
1850W ATX Modular Mining PC Power Supply 6 GPU
T.F.SKYWINDINTL 1800w Power Supply RX480 PSU Asic Bitcoin Miner Power Supply 1800W Atx Pico PSU Mining ETH ETC XMR ZEC BTB BTC
INTERFACE
20+4P *1
CPU 4+4P *1
6+2P* 12
IDE* 5
SATA *8
Features:
1.Support 6 pieces graphics card(Power is lower than 1800W)
2.1800W power supply, high efficiency,very quiet,stable performance.
3.With new big capacitor and big magnetic ring material, the performance is very stable.
4:with one year warrety
Package :
1800w psu *1
power tester *1
power cord *1
Please pay attention :
1: this psu is design forminer Mining,it can be used in normal computer but it will a little noisy when you use in normal computer , if you want a very quiet computer psu , do not buy this one and contact our sales to advise you one .
ASROCK H510 Pro BTC+ MINING BOARD
Crypto Mining
This motherboard is specifically designed for mining, the revolutionary digital crypto-currency that may be used anywhere in the world. The abundant onboard PCIe slots guarantee fast Crypto mining, while the additional power connectors provide advanced system stability while mining.
M.2 For SSD
M.2 socket supports 2260/2280/22110 SATA3 mode M.2 SSD for up to 6Gb/s.
Smart PCIe State Detection
This motherboard has included a smart way to show the status of every graphics card. While the system is booting, the Power-On, Self-Test (POST) screen will show the status of the graphics cards that were installed on the motherboard.
USB Type PCIe x1 Mining Ports
Onboard USB Type PCIe x1 Mining Ports for Setting Up Even More Graphics Cards.
PCI-E STEEL SLOTS
The advanced PCI-E Steel Slots packed with solid cover that prevent any signal interference with graphics cards. It also ensures the heavy graphics cards to be well-installed in the PCI-E slots safely.
Riser Kit Free
Install graphics cards directly on the motherboard without using riser kits to ensure ultimate stability.
*Graphics cards not include in the motherboard package.
Intel® LAN
Intel® LAN provides the best throughput performance, lower CPU utilization, enhanced stability and is able to deliver ultimate network experience to users!
Sapphire Black PCB
Pure black PCB appearance. The new Sapphire Black PCB represents rock-solid quality and gives the motherboard a more mysterious touch.
High Density Glass Fabric PCB
High Density Glass Fabric PCB design that reduces the gaps between the PCB layers to protect the motherboard against electrical shorts caused by humidity.
Power On / Reset Button
Power On & Off system with onboard button is a must for open frame mining.
Digi Power
Unlike traditional motherboards that use analog power, this motherboard uses a next generation digital PWM (Pulse-Width Modulation) design, which provides CPU Vcore voltage more efficiently and smoothly, so that the stability and lifespan of the motherboard is greatly enhanced.
Full Spike Protection
Some sensitive digital components on the motherboard are vulnerable to power surges, the excessive current may cause your system to malfunction immediately. ASRock Full Spike Protection includes various technologies to prevent your motherboard’s components from being damaged by these unexpected voltage spikes.
Cooler Master Liquid Cooling Bracket for Intel LGA 1700
$ 6.00