The crystal-clear digital screen displays the temperature and usage of your system’s CPU, and a high temperature warning.
The display is controlled via a simple application that only requires an open USB 2.0 header.
A slim all-black variant of our highly compatible AK500 CPU cooler featuring an offset direct touch, five heat pipe tower layout, a unique black matrix fin design, and a high-performance FDB fan that delivers excellent heat dissipation and extremely low noise levels.
The exceptional cooling performance of the AK500 DIGITAL on modern CPUs makes it the perfect choice for mainstream systems.
The offset heatpipe design offers direct access to your DIMM slots for better
compatibility with tall heat spreaders and let’s the RGB shine.
Suitable for Intel LGA1700/1200/1151/1150/1155 AMD AM5/AM4
Pure copper bottom with six pieces 6mm nickel plated heat pipes maximize heat dissipation to overall 260W TDP cooling capacity supports even overclocked CPUs in compact PCs.
Two high-speed DeepCool FK120 PWM 120mm fans with fluid dynamic bearing offer 1850RPM and 68.99CFM
Voise damping pads in fan corners avoid vibration and keep noise level under 28dB(A) even in full load.
AK620 CPU air cooler Dual-tower “Chessboard” heat sink unique design.
AK620 standing 160mm height is compatible with most ATX/ M-ATX case.
Dual-Tower CPU air cooler including fans in total 138mm width without blocking most RAM slots.
Unclip the fan and adjust it higher if the RAM slots are too high to be compatible with.
AK620 Series widely supports latest sockets on Intel LGA 2066/2011-v3/2011/1700/1200/1151/1150/1155 AMD AM5/AM4.
visually pleasing & leads to optimal air flow and maximum compatibility.
Quiet or Performance:
Change between quiet (22.6 dB(A)) and Performance modes by simply flipping a switch.
Sleek, Clean, and Functional:
The majestic shroud, which houses dual-tower heat sinks with seven copper heat pipes, channels all the airflow through the entire cooler.
Specialized 120/140m Fan Configuration:
Designed with a quiet and efficient 3-phase 6-pole fan motor, the 120/140mm fans provides optimal air flow at a low noise level.
Maximum Compatibility:
Supports the vast majority of modern Intel and AMD CPUs while the relocatable 120mm fan ensures maximum compatibility for high profile RGB RAM modules.
Simply Streamlined: A minimalist design with an intuitive builders experience, the CH510 answers all the needs of a sleek and quiet PC build.
Wide Cooling Support: greater airflow with up to 9x 120mm or 5x 140mm cooling fans including support for a 360mm radiator either in front or on top.
Built-In Accessories: Get the most out of your PC case with incorporated features including a pop-out headset holder, built-in GPU support, and magnetic dust-filters.
Magnetic Tempered Glass Panel: tempered glass side panel tool-free with an optional secure lock for safety during transport.
Large Compatibility: The spacious interior cabinet allows for large component compatibility with support for GPUs up to 380mm in length and CPU coolers up to 175mm in height for high-performance parts.
Simply Streamlined: A minimalist design with an intuitive builders experience, the CH510 answers all the needs of a sleek and quiet PC build.
Wide Cooling Support: greater airflow with up to 9x 120mm or 5x 140mm cooling fans including support for a 360mm radiator either in front or on top.
Built-In Accessories: Get the most out of your PC case with incorporated features including a pop-out headset holder, built-in GPU support, and magnetic dust-filters.
Magnetic Tempered Glass Panel: tempered glass side panel tool-free with an optional secure lock for safety during transport.
Large Compatibility: The spacious interior cabinet allows for large component compatibility with support for GPUs up to 380mm in length and CPU coolers up to 175mm in height for high-performance parts.
HIGH AIRFLOW CASES REIMAGINED: 3 bright PWM enabled 140mm ARGB fans are mounted in front , a hybrid side panel sets it apart .
A BREATH OF FRESH AIR: The CH560 DIGITAL provides exceptional airflow from all sides of the case.
HYBRID AIRFLOW GLASS SIDE PANEL: provides a view into the system while also supplying GPUs with additional ventilation.
DUAL-STATUS DIGITAL DISPLAY: Monitor CPU and GPU vitals from your desk with the double-status digital screen. Choose between CPU and GPU temperatures, utilization, or both through an easy to use application.
BIGGER, BRIGHTER, BETTER: 3 140mm ARGB fans pre-installed on the front of the CH560 DIGITAL introducing abundant fresh air into the chassis.
supports up to E-ATX motherboards, 175mm CPU coolers, 380mm GPUs, and 170mm PSUs.
Each FC120 fan features a single cable that transmits both power and RGB data signals that can be daisy-chained in a series of fans to reduce cable clutter
Six Bright ARGB LEDs
Individually addressable RGB LEDs surround each fan hub and shine through the translucent fan blades for dynamic RGB lighting
Onboard Lighting Preset
A default RGB lighting preset is available without the need for a dedicated RGB controller or software, just power on the PWM fan and enjoy the show
Motherboard RGB Control
Easily synchronize lighting effects to the rest of your system without needing a hub thanks to the daisy-chain cable for simple RGB software control
PWM Control 500-1500RPM
Excellent balance between powerful cooling and low noise quiet operation with automatic fan speed control
FC120 WHITE-3 IN 1
Colorful Cooling Simplified
PERFORMANCE A-RGB PWM FAN
The DeepCool FC120 performance A-RGB PWM fan simplifies cable management with a novel daisy-chainable cable that carries both. A-RGB and power functions that interconnects between fans and reduces cable clutter.
A-RGB POWER INTERCONNECT
Each FC120 fan features a single cable that transmits both power and. A-RGB data signals that can be daisy-chained in a series of fans to reduce cable clutter. The fan interconnect system removes the need for a hub and makes it easy to synchronize control of. PWM and A-RGB for up to 4 fans.
LIGHTING LUMINOSITY
Individually addressable A-RGB LEDs surround the center hub and illuminate each translucent fan blade for a classic lighting effect with high luminosity. The FC120 also features a default onboard lighting effect without needing software or a dedicated controller for fast and easy setup.
For full system A-RGB harmony, easily coordinate with other components through supported motherboard A-RGB software control.
PERFORMANCE EXCELLENCE
Designed with precision, the FC120 features enhanced static pressure and concentrated airflow for outstanding cooling performance. The narrow frame bezel provides an increased area for the fan blades and delivers higher efficiency.
Fan Speed : 500~1800 RPM±10%
Fan Airflow : 61.91 CFM
Fan Noise Level <=28 dB(A)
DETAILS MAKE THE DIFFERENCE
Built with high-quality polybutylene terephthalate (PBT) for increased durability and wear resistance, the fan blades maintain high tensile strength and stiffness to minimize unwanted vibrations.
All-Black ARGB edition of DeepCool classical GAMMAXX AG620 CPU air cooler, ideal choice to build high-performance black samurai style PC, features pure copper bottom with six pieces 6mm nickel plated heat pipes maximize heat dissipation to overall 260W TDP cooling capacity supports even overclocked CPUs in compact PCs
Two high-speed PWM 120mm fans on GAMMAXX AG620 BK ARGB CPU air cooler offer 1850RPM and 67.88CFM each to build the efficient air cooling system, meanwhile, noise damping pads on fan corners avoid vibration and keep noise level under 29.4dB(A) even in full load
DeepCool GAMMAXX AG620 BK ARGB CPU air cooler builds a tiny visual stunning world of lights with the 5v-3pin ARGB light on the fan, meanwhile, the PWM function will automatically adjust fan speed based on the CPU temperature to manage a proper balance for cooling capacity
Balanced Bidirectional Heat Pipe Technology(BBHT), optimizing heat pipes air and internal structure of GAMMAXX AG620 BK ARGB CPU air cooler for reducing negative effect caused by gravity to achieve summit heat dissipation performance in vertical PC case
All-Black “Chessboard” heatsink design makes GAMMAXX AG620 BK ARGB CPU air cooler highly recognizable, the new construction drives the airflow direction through the fins for better cooling performance
GAMMAXX AG620 BK ARGB CPU air cooler standing 157mm height which is compatible with most ATX/ M-ATX gaming case, checking CPU cooler height limit of the case before buying is strongly recommended
RAM-friendly GAMMAXX AG620 BK ARGB CPU air cooler features excellent compatibility without blocking most RAM slots, unclip the fan and adjust it higher if the RAM slots are too high to be compatible with
DeepCool GAMMAXX AG620 BK ARGB CPU air cooler is compatible with Intel LGA 1700/1200/1151/1150/1155/2066/2011-v3/2011 and AMD AM5/AM4
The 4th generation pump’s microchannel design optimizes coolant flow, while the three-phase brushless motor is rated up to 3100 RPM. A thick, pure copper plate maximizes overall cooling efficiency.
A mirror-plated top cover with a narrow frame captures an infinite reflection of 16 RGB LEDs for a vibrant visual effect. The smooth aluminum housing adds a premium finishing touch and a lustrous shine.
Keep your cool with 120mm ARGB PWM fans that beat the heat with maximum static pressure and powerful airflow. An included low-speed adapter reduces maximum noise by up to 10dB for ultimate silence.
Featuring DeepCool's patented Anti-Leak Technology. The internal valve regulates pressure and will purge it when internal pressure exceeds atmospheric pressure, leading to a longer useful life.
Sturdy mounting brackets are included for both Intel and AMD sockets that are easy to install.
The 4th generation pump’s microchannel design optimizes coolant flow, while the three-phase brushless motor is rated up to 3100 RPM. A thick, pure copper plate maximizes overall cooling efficiency.
A mirror-plated top cover with a narrow frame captures an infinite reflection of 16 RGB LEDs for a vibrant visual effect. The smooth aluminum housing adds a premium finishing touch and a lustrous shine.
Keep your cool with 120mm ARGB PWM fans that beat the heat with maximum static pressure and powerful airflow. An included low-speed adapter reduces maximum noise by up to 10dB for ultimate silence.
Featuring DeepCool's patented Anti-Leak Technology. The internal valve regulates pressure and will purge it when internal pressure exceeds atmospheric pressure, leading to a longer useful life.
Sturdy mounting brackets are included for both Intel and AMD sockets that are easy to install.
DeepCool MATREXX 55 4F GAMING CASE
The MATREXX 55 V3 is a performance mid-tower ATX case with a dual 4mm tempered glass side and front panel to showcase your build in spectacular form featuring an RGB LED strip.
Expert Features
The MATREXX 55 V3 is a performance mid-tower ATX case
Comes with dual 4mm tempered glass side
Front panel to showcase your build in spectacular form featuring an RGB LED strip.
plenty of room for your components. Inside, you'll be able to fit up to an E-ATX motherboard, two 3.5" drives, two 2.5" drives, and seven single-slot PCIe cards.
Aesthetics-wise, it has tempered-glass front and side panels, as well as a pre-installed RGB lighting strip. Its cooling options include up to three 140mm fans at the front, two 140mm fans at the top, and a single 120mm fan at the rear.
RGB Lighting Effects
The Matrexx 55 V3 comes with an expandable RGB lighting system, three 120mm RGB fans, and a pre-installed RGB strip in the front. Users can control their lighting using the built-in buttons or via a compatible motherboard.
Dual 4mm Tempered Glass
The front and left side panels are made with 4mm thick tempered glass, so users can show off their hardware and any RGB lighting they have installed.
PSU Shroud
A PSU shroud hides your power supply as well as the majority of your cables for a cleaner look.
Expert Specs:
Motherboard Support
ATX, E-ATX, Micro-ATX, Mini-ITX
Internal Drive Bays
2 x 2.5/3.5"
and2 x 2.5"
Expansion Slots
7 x Full Height
Maximum GPU Length
14.57" / 370 mm
CPU Cooler Height
6.61" / 168 mm
Fans Included
Front:3 x 120 mm LED (Unspecified rpm)
I/O
1 x USB-A (USB 3.0 / 3.1/3.2 Gen 1)
2 x USB-A (USB 2.0)
Windowed Panel
Yes
Built-In Lighting
Yes
Compatibility
Motherboard Support
ATX, E-ATX, Micro-ATX, Mini-ITX
External Drive Bays
No
Internal Drive Bays
2 x 2.5/3.5"
and2 x 2.5"
Expansion Slots
7 x Full Height
Maximum GPU Length
14.57" / 370 mm
CPU Cooler Height
6.61" / 168 mm
Supported PSU Size
ATX
Maximum PSU Length
6.69" / 170 mm
PSU Mounting Location
Bottom
Cooling
Fan Mounting
Front:3 x 120/140 mm
Rear:1 x 120 mm
Top:2 x 120/140 mm
Fans Included
Front:3 x 120 mm LED (Unspecified rpm)
Maximum Radiator Size
Front:
360 mm
Rear:
120 mm
Top:
280 mm
Fan Controller Included
No
Filter Locations
Top
Inputs / Outputs
I/O
1 x USB-A (USB 3.0 / 3.1/3.2 Gen 1)
2 x USB-A (USB 2.0)
DEEPCOOL MORPHEUS ARGB WHITE CASE
MORPHEUS
Modularity has a new face, and it comes to us in the form of DeepCool’s internally reconfigurable ATX+ chassis: the MORPHEUS. With incomparable compatibility and a spacious layout, the MORPHEUS is the best option for the DIY modder or the casual PC enthusiast.
A NEW TAKE ON MODULARITY
If sticking to the same system layout for years sounds boring, the MORPHEUS is exactly what you are looking for. Easily switch between the classic single chamber configuration and the dual chamber layout with a simple switch of a few parts. Everything necessary to shift between the two configurations is included, as well as a vertical GPU mount.
AIRFLOW AT ANOTHER LEVEL
High airflow panels surround the MORPHEUS case from the front, right, top, bottom, rear, and even the top of the PSU shroud; there will be no shortage of airflow provided to the high-powered heat-generating components inside. High-flow mesh filters are included for the front, top, and bottom panels and will keep dust out.
EXTENSIVE COOLING CAPABILITY
Fan options are unparalleled, with the ability to mount thirteen 120mm or 140mm fans or go to the extreme and add up to six 200mm fans into the conversation. The highly modular fan rails make these configurations a reality.The MORPHEUS can also support up to three 420mm radiators simultaneously. 420mm radiators can be mounted to the front, top, bottom, and side of the motherboard tray.
Bottom:3 x 120/3 x 140/2 x 180/2 x 200mm (Dual Chamber)
PSU Shroud:3 x 120/3 x 140mm (Single Chamber)
Rear:1 x 120/1 x 140mm (Single Chamber)
CPU Coolers
195mm (Single Chamber)
132mm (Dual Chamber)
A TRINITY OF FANS!
A set of highly convenient trinity fans come mounted inside the MORPHEUS: three beautifully bright 140mm ARGB fans are united into a single 420mm unit. The trinity of fans only require the wiring of a single set of PWM and ARGB cables, greatly reducing the amount of cable management.
MAXIMUM COMPATIBILITY
The ATX+ form factor of the MORPHEUS case guarantees compatibility with a large range of components. This ATX+ DeepCool case supports E-ATX motherboards while also having compatibility for GPUs up to 480mm in length, 195mm tall CPU coolers in the single chamber configuration, and multiple 420mm radiators.
DUAL REAL-TIME DIGITAL DISPLAY
Save precious space on your desktop by moving the monitoring of temperatures and usage of your CPU and GPU onto the built-in display that is included with the MORPHEUS case. A simple-to-install app and an open USB 2.0 header will get the dual display up and running.
A BEVY OF I/O PORTS
With four USB 3.0 ports, a Type-C port, and a hybrid audio port, there is no shortage of devices that can be accessed from the top front I/O panel. There is also an LED cycle button to control the built-in ARGB controller, an HDD activity LED, and a Power button to round out the front I/O.
BITS!
Add a bit of a personal touch with the fun rubber square bits! Included as a fun addition, the pixels can be used with majority of the mesh panels of the MORPHEUS case. Leave messages for others, add custom logos, or create your own 8-bit character!
Expert Specifications
Materials ; ABS+SPCC+Tempered Glass
Motherboard Support : Mini-ITX / M-ATX / ATX / E-ATX
Front I/O Ports
USB 3.0 x 4
Audio x 1
Type-C x 1
3.5″ Drive Bays ; 2
2.5″ Drive Bays ; 2 + 1
Expansion Slots ; 9 Slots
Pre-Installed Fans ; Side:1 x 420mm ARGB
Fan Support
Front: 3 x 120 / 3 x 140 / 2 x 180 / 2 x 200mm
Top: 3 x 120 / 3 x 140 / 2 x 180 / 2 x 200mm
Side: 3 x 120 / 3 x 140mm
Bottom: 3 x 120 / 3 x 140 / 2 x 180 / 2 x 200mm
PSU Shrouded: 3 x 120 / 3 x 140mm
Rear: 1 x 120 / 1 x 140mm
Radiator Support
Front: 120/140/240/280/360/420mm
Top: 120/140/240/280/360/420mm
Side: 120/140/240/280/360/420mm
Bottom: 120/140/240/280/360/420mm
Rear: 120/140mm
CPU Cooler Height Limit ; 195/132mm
GPU Length Limit ; 480mm
Power Supply Type ; ATX PS2(maximum length: 180mm)
Product Dimensions ; 528 x 250 x 551 mm (L x W x H)
Built-in four fans provide massive airflow to cool the whole notebook base with no blind area
The creative Multi-Core Control Technology enables users to apply 4 different fan-working statuses: 4 fans on / 2 upper fans on / 2 downside fans on / 4 fans off
Ergonomic design with 2 viewing angles available for the most comfort in use
Massive metal mesh panel for superb cooling performance
2 USB ports allow users to connect their personal USB devices
Ultra speed USB 3.0 pass-through connector for the fastest transfer speed;
Unique U shape design provide the most fluent cold airflow to your notebook's hot spot;
Angle adjustable to protect your spine for your health;
Two 140mm fans covers equal areas to eight 70mm fans.
Expert Description
The idea of this U Shaped notebook cooler is from the Arch of Constantine in Rome, Italy.
The built-in two 140mm fans run at the speed of 1000RPM to keep the notebook cool.
In the meanwhile, the noise level is kept at the minimum in order to keep you uninterrupted during work or study.
U Channel Cooling
It is found that the hot spot is often located on the two sides of notebooks. U Channel Cooling puts the two 140mm fans onto the two sides to cover your heating area.The empty area between accelerates the disperse of hot air.
Adjustable angle for your comfort
U PAL will free your posture by 6 different supporting angles, ensuring the comfort of your spine Physiological curvature.
Super Speed with USB 3.0 Pass-through
Super speed USB 3.0 powered USB pass-through connector allows you to transfer your data at the fastest speed.
Steady Supporting Feet
Steel supporting feet keep your notebook stable all the time.
Anti-Slip Design
The anti-slip buckles and rubber feet with high skid proof factors ensure your notebook safety in use for any special angle which offers the most
140mm blue LED fan rated at 1000 RPM and 46.11 CFM for optimum yet silent cooling
Crescent shape with metal mesh panel design provides great air flow and usage comfort
7 degree tilt for easy and wider viewing angle while working or leisure
Premium matte black finish to gel in with every place and situation
Compatible with 15.6" notebooks and below
Design
The Blue Aeolus
Blue & Black Color Mix
The whole body of WIND PAL MINI is in black:
Black metal mesh and black plastic supporting structure.
Along with a blue LED light, this cooler demonstrates the classic match of black and blue.
Slim Design
The crescent shape shows a slim and portable theme of this cooler.
High Quality Metal Mesh
The front panel is made of high quality metal mesh, which allows optimal airflow through the panel to cool the notebook effectively.
Sleek Design
The crescent body and the flat metal mesh form into a perfect piece that consists of beautiful lines.
Cable Management Groove
WIND PAL MINI has a long USB power cable to connect to the notebook; and a carefully designed groove allows you to tidy up the cable when you put this into your bag.
Supporting Feet with Adjustable Angle
The gap between the supporting feet and the cooler base allows you to unfold them easily and provides you the best viewing angle to use your notebook.
Features
14cm Blue LED Fan
WIND PAL MINI has a built-in 14cm fan to provide increased airflow to cool your notebook. With blue LED lights, this fan offers more than just cooling.
Metal Mesh Panel
The front panel is flat in metal mesh and this panel covers the whole part of the hot spots of your notebook. The honeycomb holes allow the cold air to blow the heat away quickly.
7-Degree Angle Brings You Comfortable Viewing
In order to ensure a better experience, WIND PAL MINI adopts 7-degree angle - what the industry recognizes as the most comfortable support angle. It's not only in line with the vast majority of users' viewing habits, but also in line with the spine, offering a more healthy experience.
Performance
Big Airflow for Optimal Cooling
The front panel is flat metal mesh. This panel covers the whole part of the hot spots of your notebook. The honeycomb holes allow the cold air to blow the heat away quickly.
Sleek Design
The crescent body and the flat metal mesh form into a perfect piece that consists of beautiful lines.
MORPHEUS
Modularity has a new face, and it comes to us in the form of DeepCool’s internally reconfigurable ATX+ chassis: the MORPHEUS. With incomparable compatibility and a spacious layout, the MORPHEUS is the best option for the DIY modder or the casual PC enthusiast.
Sleek Design
The crescent body and the flat metal mesh form into a perfect piece that consists of beautiful lines.
Cable Management Groove
WIND PAL MINI has a long USB power cable to connect to the notebook; and a carefully designed groove allows you to tidy up the cable when you put this into your bag.
Supporting Feet with Adjustable Angle
The gap between the supporting feet and the cooler base allows you to unfold them easily and provides you the best viewing angle to use your notebook.
14cm Blue LED Fan
WIND PAL MINI has a built-in 14cm fan to provide increased airflow to cool your notebook. With blue LED lights, this fan offers more than just cooling.
Metal Mesh Panel
The front panel is flat in metal mesh and this panel covers the whole part of the hot spots of your notebook. The honeycomb holes allow the cold air to blow the heat away quickly.
7-Degree Angle Brings You Comfortable Viewing
In order to ensure a better experience, WIND PAL MINI adopts 7-degree angle - what the industry recognizes as the most comfortable support angle. It's not only in line with the vast majority of users' viewing habits, but also in line with the spine, offering a more healthy experience.
Big Airflow for Optimal Cooling
The front panel is flat metal mesh. This panel covers the whole part of the hot spots of your notebook. The honeycomb holes allow the cold air to blow the heat away quickly.
Sleek Design
The crescent body and the flat metal mesh form into a perfect piece that consists of beautiful lines.
Blue & Black Color Mix
The whole body of WIND PAL MINI is in black: