- Supports 10th Gen Intel® Core™ Processors and 11th Gen Intel® Core™ Processors
- Supports DDR4 3200MHz
- Graphics Output: HDMI
- 6 PCIe 3.0 x16, 1 Mining Port (M_Port1 at x1)
- 1 SATA3, 1 M.2 (SATA3)
- 2 Rear USB 3.1 Gen1 Type-A
- 4 USB 2.0 Type-A (2 Rear, 2 Front)
- Intel® Gigabit LAN
- 2 Extra 24-pin ATX Power Connector
- Onboard Power On / Reset Button
- Fully Independent Power Rail
-1%
ASROCK H510 Pro BTC+ MINING BOARD
Original price was: $ 225.00.$ 223.00Current price is: $ 223.00.
Description
Additional information
| VEIKK , A50 , DRAWING , TABLET , 10 |
{attribute:VEIKK , A50 , DRAWING , TABLET , 10 |
|---|
Related products
RAM ADATA 4GB DDR4 2666 DESKTOP
Product Specification
| Memory | 4 GB |
| Brand | ADATA |
| Warranty | 3 Years Limited Warranty |
| Minimum Order Quantity | 1 Nos |
Product Description
ADATA Premier Memory 4GB DDR4 2666Mhz RAM for Desktop
ADATA Premier DDR4 2666 unbuffered-DIMM memory is the latest upgrade solution that supports Intel's newest platforms for faster data transfer and enhanced power efficiency. Utilizing a 288-pin design, operating voltage has been reduced from 1.5V on DDR3 to 1.2V, which not only helps save power by 20%, but also boosts transfer bandwidth speed to 21.3GB/s. Every chip in ADATA memory modules meets strict JEDEC and RoHS standards, ensuring compatibility, stability, and environmentally friendly products. All ADATA memory modules are produced and tested using a rigorous quality control process for rapid computing and stable operation. In addition, ADATA memory modules provide customers a lifetime warranty for maximum assurance with excellent service.
Thermal Grizzly Hydronaut Thermal Paste 1.5 ml 3.9 GRAM
Thermal Grizzly Hydronaut 1.5ml / 3.9g Thermal Paste Model TG-H-015-R
Features:
Hydronaut can be used for overclocking due to it’s excellent thermal conductivity, but it was created specifically for users with larger-scale cooling solutions, who are looking for a quality product with an excellent price-performance ratio, for example for their water cooling system.
suited for Overclocking
excellent thermal conductivity
no curing
silicone-free
no electrical conductivity
applicable with aluminum (warning is for Conductonaut only!)
Specs:
Thermal Conductivity 11,8 W/mk
Thermal Resistance 0,0076 K/W
Electrical Conductivity 0 pS/m
Viscosity 140-190 Pas
Speific Weight 2,6g/cm3
Temperature -200 °C / +350 °C
Capacity 1,5ml / 3,9g – 3ml / 7,8g
PCIe Riser Mining Card,Awakingdemi NGFF M.2 to USB 3.0
- he main control board uses the direct power supply mode of PCI-E interface, and does not need to connect the power line again
- The card slot is imported to ensure a better connection.
- A high quality connector is used for the card slot to make the card contact well.
- Multi layer shielded wire for PCI-E connector.
- The PCI-E connector is relatively wear-resistant and increases electrical conductivity.
UPS PROLINK Super Fast Charging 650A 350WATT
GENERAL
| Capacity | 650VA |
| Dimension (mm) | 286 x 96 x 138 (D x W x H) |
| Weight (kg) | 4.3 |
INPUT
| Voltage Range | 162 ~ 290VAC (Single boost) 140 ~ 300VAC (Double boost) |
| Frequency | 50Hz/60Hz (Auto-sensing) |
| Phase | Single + GND |
OUTPUT
| Voltage Range | 220-240VAC |
| Battery Mode | 220-240VAC |
| Frequency | 50Hz ±1% (Battery mode) |
| Waveform | Simulated sine wave (Battery mode) Sine wave (AC mode) |
| Transfer Time | 2ms typical |
BATTERY
| Type | 12V/8.2AH x 1 |
| Backup Time | 8 - 20 mins depending on load |
| Recharge Time | 2-4 hours recover to 90% capacity |
INTERFACE & INDICATORS
| Interface | RS232, USB port, RJ45/RJ11 (Optional) |
| Display | LED/LCD Optional |
| Alarm | Batt. Mode, low battery, overload, fault, etc. |
PROTECTION/MONITORING
| Short Circuit Protection | Yes (Line mode & battery mode) |
| Surge Protection | Yes |
| Alarm | Audible & Visual |
| Overload Protection | Line mode : 100 - 120% 1 min change to fault mode >120% change to fault mode immediatelyBattery mode : 100 - 120% 1 min change to fault mode >120% change to fault mode immediately |
| Intelligent Battery | Prevent overcharging of battery |
| Management | Protect battery and prolong battery life |
Real Panel
| 1. AC Mode Indicator Green LED Lighting 2. Battery Mode Indicator Battery Normal : Yellow LED Lighting and Blinking every 30s Battery Low : Yellow LED Lighting and Blinking every 2s 3. Overload and Fault Indicator Overload : Red LED Blinking every 2s Fault : Red LED Lighting 4. Power Switch 5. Power AC Input 6. Backup Outlets |
Dual 24-Pin ATX Power Supply Motherboard Adapter Cable for Using Two PSU’s by Cryptosaur Gear MINING
no warranty on all mining parts and we are not responsible for any damage caused from using this item !!!!!
About this item
- PSU Splitter Run Two Power Supplies with One cable.
- No 24-Pin jumper needed. Power Supplies turn on at the same time.
- 30cm Length 18AWG Cable.
- Two Female 24-Pin ATX attachments for each PSU's 24-Pin Male cable.
- 1 Male 24-Pin ATX end for attachment to your Motherboard.
Thermal Grizzly Carbonaut Thermal Pad, 32 × 32 × 0.2 mm
The high-tech carbon thermal pads of the Thermal Grizzly Carbonaut series can be used excellently as an alternative for thermal pastes from the medium performance segment. They have the exclusive advantage of being reusable, and they have a very elastic and adaptable surface with very high thermal conductivity. Even the smallest component differences can be compensated very well.
Maximum thermal conductivity
Constantly high performance
Reusable
Doesn't dry out
Flexible and easy to use
The Thermal Grizzly Carbonaut Pad is a thermal conduction pad made of carbon fiber. Its specially developed polymer gives the thermal pad its flexibility and its “soft gap filler” properties. The carbon fiber structure ensures excellent thermal conductivity. Thermal Grizzly Carbonaut is easily reusable. In addition, the Thermal Grizzly Carbonaut has a very high thermal conductivity, which it can develop even with very little pressure. The Thermal Grizzly Carbonaut remains constant in heat transfer performance.
Note: Carbonaut is electrically conductive.The Thermal Grizzly Carbonaut Pad is a thermal conduction pad made of carbon fiber. Its specially developed polymer gives the thermal pad its flexibility and its “soft gap filler” properties. The carbon fiber structure ensures excellent thermal conductivity. Thermal Grizzly Carbonaut is easily reusable. In addition, the Thermal Grizzly Carbonaut has a very high thermal conductivity, which it can develop even with very little pressure. The Thermal Grizzly Carbonaut remains constant in heat transfer performance. Note: Carbonaut is electrically conductive.
Thermal conductivity 62.5 W / mk
Strength 0.2mm
Temperature -250 ° C / +150 ° C
Model: TG-CA-32-32-02-R