| VEIKK , A50 , DRAWING , TABLET , 10 |
{attribute:VEIKK , A50 , DRAWING , TABLET , 10 |
|---|
-5%
COUGAR DARK BLADER X5 WHITE CASE
Original price was: $ 78.00.$ 74.00Current price is: $ 74.00.
Additional information
Related products
Dual 24-Pin ATX Power Supply Motherboard Adapter Cable for Using Two PSU’s by Cryptosaur Gear MINING
no warranty on all mining parts and we are not responsible for any damage caused from using this item !!!!!
About this item
- PSU Splitter Run Two Power Supplies with One cable.
- No 24-Pin jumper needed. Power Supplies turn on at the same time.
- 30cm Length 18AWG Cable.
- Two Female 24-Pin ATX attachments for each PSU's 24-Pin Male cable.
- 1 Male 24-Pin ATX end for attachment to your Motherboard.
Thermal Grizzly Aeronaut 8.5 W/M · K 1G Heat Sink
Thermal Grizzly Aeronaut Thermal Paste 1 Gram Model TG-A-001-RS
Features :
Aeronaut thermal grease is the ideal beginner’s product with high effectiveness. Great surface protection, as well as good heat transfer capabilites make Aeronaut the ideal choice for users who want to optimize their cooling solution in an effective way, or maybe want to use an alternative to the thermal grease included with their hardware, with a remarkable cost effectiveness to boot.
very good thermal conductivity
long-term durability
no curing
no electrical conductivity
applicable with aluminum (warning is for Conductonaut only!)
Specs:
Thermal Conductivity 8,5 W/mk
Thermal Resistance 0,0129 K/W
Electrical Conductivity 0 pS/m
Viscosity 110160 Pas
Specific Weight 2,6g/cm3
Temperature -150 °C / +200 °C
Capacity 1,5ml/3,9 g 3ml/7,8g
COOLER MASTER Riser Cable PCIE 3.0 X16 VER. 2
Flex your Graphics Muscle
The Cooler Master Riser Cable PCIe 3.0 x16 Ver. 2 - 300mm comes revised for maximum flexibility and durability. High quality plastics grant increased cable flexibility and strength for the tightest PCI card installations, while the heavy-duty shielding prevents electromagnetic interference from degrading signal quality. A stainless steel PCI slot adds extra rigidity to the riser to support even the largest and heaviest graphics cards. The IPC4101D compliant PCB provides the best in class performance under high thermal loads and cable flex than any of the non-compliant competitor riser cables in the market.
Ultra Durable PCB
The IPC4101D compliant PCB provides the best in class performance under high thermal loads, cable flex, and moisture resistance than any of the non-compliant competitor riser cables in the market.
Heavy duty shielding
EMI shielded 28/30 AWG copper wires ensure minimal signal delay and electromagnetic interference-free operation.
Gold pin connections
Gold PCI pins allow maximum electrical conductivity with a rated 110g of insertion force per contact pair for high durability.
Protective ABS casing
UV resistant ABS casing protects cable connection points from rough handling.
Freely express yourself: Download the 3d printable files (.stl) and create your own customized design.
Stainless steel-reinforced PCI slot
Nickel-plated stainless steel PCI slot adds rigidity for superior card retention for even the heaviest PCI card installations.
Ultra-flexible cable sleeves
TPE cable sleeves allow for maximum flexibility and durability for the tightest cable routing jobs.
- Model Number
- MCA-U000C-KPCI30-300
- Units per package
- 1 piece per package
- Available Color(s)
- Black
- Compatibility
- PCI-E 3.0
- Certifications
- EMI, IPC4101D/21
- Materials
- PCBA, Copper Wire
- Insulation Materials
- PE, TPE
- Other Materials
- ABS, Stainless Steel, Nickel, Gold, Brass
- Connectors
- PCI-E x16 Male to PCI x16 90° Female
- Cable Length
- 300mm
- Contact Current Rating
- 1.1A per contact pin
- Operating Temperature
- -20° to +100° Celsius
- Weight
- 110g
- Warranty
- 1 year
- EAN Code
- 4719512101537
- UPC Code
- 884102073830
- Series
- Others
- Note
- This product is only compatible for devices that support the PCI-E 3.0 specification. If you use this product with a motherboard that supports PCI-E 4.0, please enter into BIOS option and select PCI-E 3.0 before installation.
Document
FANTECH CRYPTO VX7 GAMING MOUSE
FANTECH CRYPTO VX7 Gaming Mouse | Optical Sensor 8,000 DPI | 6 Programmable Buttons | 10 Million Clicks Lifetime
MACRO GAMING MOUSE
- Instant Optical Sensor
- Up to 60 IPS / 15G Acceleration
- On-the-fly Adjustable DPI 200-8,000 DPI
- 125Hz Polling Rate
- Huano 10 Million Clicks Lifetime
- 4 Colors LED
- Six Independently Programmable Buttons
- 1.8m Nylon Braided USB Cable
- Size: 128mm x 68mm x 41mm
| Brand | Fantech |
| Colour | BLACK |
| Connectivity technology | USB |
| Movement detection technology | Optical |
| Recommended uses for product | Gaming |
| Item weight | 0.2 Kilograms |
| Material | Plastic |
| Hardware Platform | PC |
| Embellishment | LED |
TP-LINK AX3000 Wi-Fi 6 Bluetooth 5.0 PCIe Adapter
TL-TX50E AX3000 Wi-Fi 6 Bluetooth 5.0 PCIe Adapter
| HARDWARE FEATURES | |
|---|---|
| Dimensions | 3.7 x 4.8 x 0.8 in (95.2 x 120.8 x 21.5 mm) |
| Antenna Type | Two High-Gain Dual Band Antennas |
| Chipset | Intel Wi-Fi 6 Chipset |
| WIRELESS FEATURES | |
|---|---|
| Wireless Standards | IEEE 802.11ax/ac/n/a 5 GHz IEEE 802.11ax/n/g/b 2.4 GHz Bluetooth 5.0/4.2/4.0 |
| WLAN Signal Rate | 5 GHz 11ax: Up to 2402 Mbps(dynamic) 11ac: Up to 1733 Mbps(dynamic) 11n: Up to 300 Mbps(dynamic) 11a: Up to 54 Mbps(dynamic) 2.4 GHz 11ax: Up to 574 Mbps(dynamic) 11n: Up to 300 Mbps(dynamic) 11g: Up to 54 Mbps(dynamic) 11b: Up to 11 Mbps(dynamic) |
| WLAN Reception Sensitivity | 5 GHz : 11ax HT160：-56.25dBm 11ax HT80: -59dBm 11ax HT40: -62.25dBm 11ax HT20: -65dBm 11ac HT160：-62dBm 11ac HT80: -65.5dBm 11ac HT40: -69.75dBm 11ac HT20: -73.75dBm 11n HT40: -74.5dBm 11n HT20: -77.5dBm 11a 54Mbps: -77.75dBm 11a 6Mbps: -94.5dBm 2.4GHz : 11ax HT40: -60.75dBm 11ax HT20: -63.75dBm 11n HT40: -73dBm 11n HT20: -76.25dBm 11g 54Mbps: -76.5dBm 11b 11Mbps: -89dBm |
| WLAN Transmit Power | 5 GHz : 27dBm(FCC) 2.4 GHz : 26dBm(FCC) |
| WLAN Modes | Infrastructure mode |
| Wireless Security | Support 64/128 bit WEP, WPA/WAP2/WPA3, WPA-PSK/WPA2-PSK, 802.1x |
| Modulation Technology | DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM, 256-QAM, 1024QAM |
| Bluetooth Profiles | Archer TX50E support the native BT profiles implemented in Windows 10. For the latest information on Windows 10 BT profiles please refer to https://support.microsoft.com/en-us/help/10568/windows-10-supported-bluetooth-profiles |
Pop-up Mobile Portable External DVD RW CD Player Burner
About this item
- Specially designed with dual port Type-C and USB 3.0 interface 2-in-1, the external DVD drive is compatible with almost all laptops, all-in-one desktops and tower computers with Windows XP/2003/Vista/7/8/10, Linux, and Mac OS system. It is also backwards compatible with USB2.0 and USB1.0, bringing you faster data transmission speed (up to a maximum of 5Gbps) and stable performance with strong fault tolerance.
- Supports Plug and play, easy to use. No drive and external power needed. Just plug it into your USB port and the DVD drive will be detected. Comes with standard with an eject button so that you never have to worry about your disc getting stuck inside this external CD/DVD optical drive.
- Embedded cable design, made with premium wire drawing material, enough fashionable and scratch-proof exterior. Net weight is 0.72 lbs (325g), 0.75" (19mm) in height. This external drive is slim, lightweight, compact and portable.
- It's not only a reader, but also writer / rewriter / burner for your computers. Allow you to watch movies, listen to music, create backup disc, install software or burn music disc. Support CD-R, CD-ROM, CD+/-RW, DVD-ROM, DVD-R, DVD+/-RW, DVD-R DL, VCD discs.
- We offer one-year after sales service. More than ten years of experience in optical drives allows us to have the ability to provide you with premium quality products and lifetime professional tech support. We cherish your trust, please feel free to contact us.
Thermal Grizzly Carbonaut Thermal Pad, 32 × 32 × 0.2 mm
The high-tech carbon thermal pads of the Thermal Grizzly Carbonaut series can be used excellently as an alternative for thermal pastes from the medium performance segment. They have the exclusive advantage of being reusable, and they have a very elastic and adaptable surface with very high thermal conductivity. Even the smallest component differences can be compensated very well.
Maximum thermal conductivity
Constantly high performance
Reusable
Doesn't dry out
Flexible and easy to use
The Thermal Grizzly Carbonaut Pad is a thermal conduction pad made of carbon fiber. Its specially developed polymer gives the thermal pad its flexibility and its “soft gap filler” properties. The carbon fiber structure ensures excellent thermal conductivity. Thermal Grizzly Carbonaut is easily reusable. In addition, the Thermal Grizzly Carbonaut has a very high thermal conductivity, which it can develop even with very little pressure. The Thermal Grizzly Carbonaut remains constant in heat transfer performance.
Note: Carbonaut is electrically conductive.The Thermal Grizzly Carbonaut Pad is a thermal conduction pad made of carbon fiber. Its specially developed polymer gives the thermal pad its flexibility and its “soft gap filler” properties. The carbon fiber structure ensures excellent thermal conductivity. Thermal Grizzly Carbonaut is easily reusable. In addition, the Thermal Grizzly Carbonaut has a very high thermal conductivity, which it can develop even with very little pressure. The Thermal Grizzly Carbonaut remains constant in heat transfer performance. Note: Carbonaut is electrically conductive.
Thermal conductivity 62.5 W / mk
Strength 0.2mm
Temperature -250 ° C / +150 ° C
Model: TG-CA-32-32-02-R