| VEIKK , A50 , DRAWING , TABLET , 10 |
{attribute:VEIKK , A50 , DRAWING , TABLET , 10 |
|---|
Back to products
GAMDIAS AEOLUS M2-1205R 5*FANS HYDRAULIC 1500 RPM
Original price was: $ 39.00.$ 33.00Current price is: $ 33.00.
GAMDIAS AEOLUS M2-1204R ELITE 4*FANS HYDRAULIC 2500 RPM
$ 38.00
Additional information
Related products
UPS PROLINK Super Fast Charging 650A 350WATT
GENERAL
| Capacity | 650VA |
| Dimension (mm) | 286 x 96 x 138 (D x W x H) |
| Weight (kg) | 4.3 |
INPUT
| Voltage Range | 162 ~ 290VAC (Single boost) 140 ~ 300VAC (Double boost) |
| Frequency | 50Hz/60Hz (Auto-sensing) |
| Phase | Single + GND |
OUTPUT
| Voltage Range | 220-240VAC |
| Battery Mode | 220-240VAC |
| Frequency | 50Hz ±1% (Battery mode) |
| Waveform | Simulated sine wave (Battery mode) Sine wave (AC mode) |
| Transfer Time | 2ms typical |
BATTERY
| Type | 12V/8.2AH x 1 |
| Backup Time | 8 - 20 mins depending on load |
| Recharge Time | 2-4 hours recover to 90% capacity |
INTERFACE & INDICATORS
| Interface | RS232, USB port, RJ45/RJ11 (Optional) |
| Display | LED/LCD Optional |
| Alarm | Batt. Mode, low battery, overload, fault, etc. |
PROTECTION/MONITORING
| Short Circuit Protection | Yes (Line mode & battery mode) |
| Surge Protection | Yes |
| Alarm | Audible & Visual |
| Overload Protection | Line mode : 100 - 120% 1 min change to fault mode >120% change to fault mode immediatelyBattery mode : 100 - 120% 1 min change to fault mode >120% change to fault mode immediately |
| Intelligent Battery | Prevent overcharging of battery |
| Management | Protect battery and prolong battery life |
Real Panel
| 1. AC Mode Indicator Green LED Lighting 2. Battery Mode Indicator Battery Normal : Yellow LED Lighting and Blinking every 30s Battery Low : Yellow LED Lighting and Blinking every 2s 3. Overload and Fault Indicator Overload : Red LED Blinking every 2s Fault : Red LED Lighting 4. Power Switch 5. Power AC Input 6. Backup Outlets |
Cougar GEX 1050 80 Plus Gold Fully Modular Certified PSU
High Efficiency for Power Saving
GEX1050 features a highly efficient design that surpasses the 80Plus Gold standard, to help you save money on your electricity bill.
Perfect Cooling System with 0dB mode & HDB Fan
Using COUGAR’s exclusive 135mm silent fan, the advanced frame increase the concentration of air-flow and its fan curvature has been fine-tuned to reduce vibration at any loads.
Solid Durability with Japanese Electrolytic Capacitors
Firstly, GEX1050 has been designed and thoroughly tested to perform optimally in 40ºC working temperature environments.
Second, it includes 105°C Japanese capacitors for main and standby power to ensure keep providing computer with stable electrical supply.
Advanced Structure for Impeccable Stability
GEX1050’s LLC, DC-DC and Tri-Sense(3.3V, 5V, and 12V) design has been created to provide high-quality outputs, with an extremely tight 2% voltage regulation to deliver a stabler operation.
Perfectly Support GeForce RTX™ 30 Series GPU
The GEX1050 was designed for high end gamers and complicated media workers which can perfectly supporting RTX 30 series GPU and provide stable performance.
Features
80PLUS Gold Certified
Up to 92% efficiency power conversion to cut down your electricity bill
Fully Modular Power Supply Unit
Connect only the cables you need for less clutter and better airflow
Durable HDB Fan
Hydro Dynamic Bearing Fan: Extended durability and lower noise levels
Superior fan Curve Tuning
Advanced technology for noise minimization
Flawless Operation at 40°C
Powerful performance at 40°C ambient temperature
Compatible with The Lastest PC Technology
Created for user with current and next-generation multi-core CPU platforms
Support PCI Express 4.0 Next Generation Graphics Cards with 8(6+2) Pin PCI-E Connector
Strong Safeguards : OCP, OPP, OVP, UVP, SCP & OTP
Maximum safety for your key system components
Specifications
| Model Name | AC Input | DC output | |||||
| +3.3V | +5V | +12V | -12V | +5Vsb | Total | ||
| GEX1050 | AC100-240V 47-63Hz 13-6A | 20A | 20A | 87.5A | 0.3A | 3A | 1050W |
| 120W | 1050W | 3.6W | 15W | ||||
| Connector | Main | CPU | Peripherals | S-ATA | PCI-E | |
| Pin | 24(20+4) Pins | 8(4+4) Pins | 8 Pins | 4 Pins | 5 Pins | 8(6+2) Pins |
| GEX1050 | 1 | 1 | 1 | 4 | 12 | 8 |
GAMDIAS ARGUS E4 ELITE MIDTOWER TG*1 / FAN*1 WHITE CASE
GAMDIAS-ARGUS-E4
GAMDIAS ARGUS E4 ELITE MIDTOWER TG*1 / FAN*1 WHITE CASE
Sync with 5V ARGB Motherboard
RGB Streaming Lighting
Tempered Glass Panel Swing Door
1 Built-in 120mm ARGB Rear Fan
Supports Motherboards up to ATX
Magnetic Dust Filter
Switch RGB Lighting Style with One Touch
Enameled White Painted Case
CASE
- Case Type MID Tower
- MB Support ATX、Micro-ATX、Mini-ITX
- Synchronization 5V 3-Pin Addressable Header
- CASE Color White
- Expansion Slots 7+3
- Material SPCC & ABS & Tempered glass
- Window Left
- Radiator Support Top: 240mm / Rear: 140mm、120mm
- Fan Support Top: 2 x 120mm 、2 x 140mm / Rear: 1 x 120mm 、1 x 140mm
- Pre-installed Fans Rear: 1 x 120mm ARGB Fan
- Drive Bays 2 x 3.5" or 1 x 2.5"+1 x 3.5"(HDD Cage) / 3 x 2.5"
- I/O Port USB 3.0 x1、USB 2.0 x2、HD Audio x1、LED control x1
- Clearance CPU cooler height limitation: 190mm VGA length limitation: 340mm PSU length limitation: 180mm
- Dimension (L x W x H) 393 x 230 x 460 mm
- Net Weight 5.4 kg / 11.9 lb
Kingston NV2 500G M.2 2280 NVMe Internal SSD | PCIe 4.0 Gen 4×4 | Up to 3500 MB/s | SNV2S/500G
Kingston NV2 500G NVMe Internal SSD
Key Features
- 500GB Capacity
- 3000 MB/s Maximum Read Speed
- 1300 MB/s Maximum Write Speed
- PCIe 4.0 x4 NVMe Interface
- M.2 2280 Form Factor
Expand the storage of your desktop or notebook with the Kingston 500GB NV2 M.2 2280 PCIe 4.0 x4 NVMe SSD. Offering ample room with a capacity of 250GB, you can store a wide range of files and programs with ease while experiencing enhanced read and write speeds up to 3000 MB/s and 1300 MB/s, respectively. This drive fits into the
| Storage Capacity | 500GB PCIe 4.0 x4 M.2 2280 SSD |
| Read Speed | Maximum: 3000 MB/s |
| Write Speed | Maximum: 1300 MB/s |
| Buffer | None |
| Pre-Format | None |
SSD Specs
| SMART Support | No |
| TRIM Support | No |
General
| Dimensions | 3.1 x 0.9 x 0.15" / 8 x 2.2 x 0.38 cm |
| Weight | 0.2 oz / 6.5 g |
DeepCool CC360 ARGB Mid-Tower ATX Gaming PC Case, 4X Pre-Installed 120mm LED Fans, Tempered Glass Side Panel, Black
DeepCool CC360 ARGB Mid-Tower PC Case
Expert Features
- The CC360 M-ATX case offers new and experienced builders a perfect start with great component compatibility and high-quality features.
- 3 120mm ARGB fans, an airflow front panel, and a mesh top panel, the CC360 provides excellent airflow through the entire chassis.
- Enough space to support high-performance AIO liquid coolers with room for a 360mm radiator in front or a 240mm radiator on top.
- Cooling fan support for up to 6x 120mm or 4x 140mm.
- Install up to 2x 2.5” SSDs directly on the backplate & 2x 3.5” HDDs in a removable drive cage .
- Easily access USB3.0, USB 2.0, and audio ports from the front I/O panel. Supports cpu coolers up to 165mm, GPUs up to 320mm, and PSUs up to 170mm.
Expert Features
ProductDimensions |
418×215×431mm(L×W×H) |
| Net Weight | 4.9Kg |
| Materials | ABS+SPCC+Tempered Glass |
| Motherboard Support | Mini-ITX / Micro-ATX |
| Front I/O Ports | USB3.0×1、USB2.0×1、Audio×1 |
| 3.5" Drive Bays | 2 |
| 2.5" Drive Bays | 2+1 |
| Expansion Slots | 4 Slots |
| Pre-Installed Fans | Front: 2×120mm Rear: 1×120mm |
Fan Support |
Front: 3×120 / 2×140mm Top: 2×120 / 2×140mm Rear: 1×120mm PSU Shrouded: 2×120mm |
| Radiator Support | Front: 120/140/240/280/360mm Top: 120/140/240mm Rear: 120mm |
| CPU Cooler Height Limit | 165mm |
| GPU Length Limit | 320mm |
| Power Supply Type | ATX PS2 （maximum length: 160mm） |
| EAN | 6933412774976 |
| P/N | R-CC360-BKAPM3-G-1 |
GAMDIAS ATHENA M6 LITE , ATX Mid Tower Gaming Case with Side Tempered Glass, 4X 120mm ARGB Case Fans , Magnetic Dust Filter – BLACK
ATHENA M6 LITE GAMING CASE BLACK
GAMDIAS ATHENA M6 LITE , ATX Mid Tower Gaming Case with Side Tempered Glass, 4X 120mm ARGB Case Fans and Sync with 5V RGB Motherboard ,Mesh Front Panel , Perforated Chassis , Magnetic Dust Filter
-
Immersive Underglowing RGB Gaming Experience:
-
The Best Air Flow Gaming Cases:
-
Easy and Clean Cable Management:
-
Great Expandability for Your System Config.:
- ONE CLICK. SYNC ALL:
Expert Specs :
- Case Type : MID Tower
- MB Support : ATX、Micro-ATX、Mini-ITX
- Synchronization : 5V 3-Pin Addressable Header
- CASE Color : Black
- Expansion Slots : 7
- Material : SPCC & ABS & Tempered glass
- Window : Left
- Radiator Support : Top: 240mm / Front: 360mm、280mm、240mm / Rear: 120mm、140mm
- Fan Support : Top: 2 x 120mm 、2 x 140mm / Front: 3 x 120mm、2 x 140mm/ Rear: 1 x 120mm / 1 x 140mm
- Pre-installed Fans : Front: 3 x 120mm ARGB Fans/ Rear: 1 x 120mm ARGB Fan
- Drive Bays : 2 x 3.5" or 1 x 2.5"+1 x 3.5"(HDD Cage) / 2 x 2.5"
- I/O Port : USB 3.0 x1、USB 2.0 x2、HD Audio x1、LED control x1
- Clearance : CPU cooler height limitation: 190mm VGA length limitation: 340mm PSU length limitation: 180mm
- Dimension (L x W x H)410 x 230 x 477 mm
- Net Weight5.89 kg / 12.99 lb
FROM THE MANUFACTURER :
ATHENA M6 LITE GAMING CASE BLACK
UNRESTRICTIVE BRILLIANCE- Sync with Motherboard
- Triple-sided Underglow
- 4 Built-in 120mm ARGB Fans
- Seamless Tempered Glass Window
- Mesh Front Panel
- Perforated Chassis
- Magnetic Dust Filter
UNRESTRICTIVE BRILLIANCE
ATHENA M6 LITE is a mid-tower case with a unique lighting profile focused on optimizing airflow performance. The case features a panoramic mesh front panel, four built-in 120mm ARGB fans, and triple-sided ARGB light strips to leverage airflow performance and create ambient underglow lighting effects.EXTENSIVE MESH PANEL
The ATHENA M6 LITE comes with a pillar-shaped mesh front panel with room for three 120mm RGB fans, implemented with all-around perforated ventilation. The case is designed to create an environment with unrestrictive airflow to meet next-generation cooling demands.HEIGHTENED AIRFLOW
The lower compartment of the chassis takes on a perforated design with the elevated case stands allowing massive air intake and exhaust on all sides of the case.3+1 ARGB FANS
The case is preinstalled with four high-performance hydraulic ARGB fans to create a synchronized setup while enhancing air intake and exhaust.SYNCHRONIZE AND DISPLAY
The ATHENA M6 LITE supports system-wide ARGB to compatible motherboards with lighting synchronization that controls the 4 built-in ARGB fans and 3 ARGB light strips with a single push of a button.SIMPLE AND ACCESSIBLE
The I/O is equipped at the top front of the case, featuring 2x USB port, 1x USB 3.0 port, LED lighting controls, and additional audio connectivity.COOLING SUPPORT
The case supports up to 6 fans and up to a 360mm radiator in the front and 240mm at the top.INTERIOR ACCOMMODATION
The ATHENA M6 LITE supports up to ATX motherboards and VGA cards with lengths up to 340mm.OUT OF SIGHT, OUT OF MIND.
The hidden compartment has ample room for cable management optimization, and accommodates PSU lengths up to 180mm.BRILLIANT AND CONCISE
The ATHENA M6 LITE focuses on high airflow and ARGB appearance with a mesh front panel, 4 ARGB fans, and triple underglow light strips. It also comes with dust filters on the top and bottom of the case to clean out dust easier than ever.
Thermal Grizzly NVMe M.2 SSD Cooler
Product Description
Thermal Grizzly
The Thermal Grizzly M.2 SSD Cooler is a passive cooling solution for next generation form factor SSDs. It's no secret that modern M.2 NVMe SSDs, in particular, get hot when in demanding use, so the speed of the drive has to be slowed down. To counteract this problem and get full performance, the Grizzly professionals have developed a compact passive cooler that significantly reduces the temperatures of an M.2 SSD.
Thermal Grizzly M.2 SSD Cooler
- Ideal heat dissipation solution for the NGFF SSDs. Forget about overheated storage and reduced transfers. Compatible with drives of the many manufacturers such as Samsung, Kingston, ADATA.
- Installation is simple. Just screw the cooler to the drive! You can be sure that the heat sink is firmly attached. It is more reliable and less problematic than mounting clips or rubber bands, as in the case of competing solutions.
- Elegant design consists of black, aluminum heatsink, will match well with every motherboard.
At a Glance:
- Black Passive Cooler for M.2 SSDs.
- Lower temperatures to reduce speed limitations.
- Compatible with one-sided M.2 NVMe SSDs (2280).
- Easy installation.
The sophisticated design of the cooler consists of a front cover and a backplate as well as two matching Minus Pad 8 high performance thermal pads. Note that the Thermal Grizzly M.2 SSD Cooler is only compatible with one-sided, 22-millimeter-long M.2 NVMe SSDs that are 80 millimeters long, and that M.2 (NGFF) connectors with a height of 4.2 millimeters must be used.
Specifications:
- Color: Black
- all one-sided M.2 NVMe SSDs (22 mm width, 80 mm lenght)
- M.2 (NGFF) Connector must be 4.2 mm height
- 1x Front cover
- 1x Back plate
- 1x thermal pad 0.5 mm
- 1x thermal pad 1 mm