| VEIKK , A50 , DRAWING , TABLET , 10 |
{attribute:VEIKK , A50 , DRAWING , TABLET , 10 |
|---|
Back to products
MIC K9 WIRELESS ( LIGHTNING ) FOR IPHONE BLACK MICROPHONE
Original price was: $ 10.00.$ 9.00Current price is: $ 9.00.
LIAN LI STRIMER PLUS V2 12VHPWR 12 LIGHT GUIDE 320MM
$ 60.00
Additional information
Related products
UPS PROLINK Super Fast Charging 650A 350WATT
GENERAL
| Capacity | 650VA |
| Dimension (mm) | 286 x 96 x 138 (D x W x H) |
| Weight (kg) | 4.3 |
INPUT
| Voltage Range | 162 ~ 290VAC (Single boost) 140 ~ 300VAC (Double boost) |
| Frequency | 50Hz/60Hz (Auto-sensing) |
| Phase | Single + GND |
OUTPUT
| Voltage Range | 220-240VAC |
| Battery Mode | 220-240VAC |
| Frequency | 50Hz ±1% (Battery mode) |
| Waveform | Simulated sine wave (Battery mode) Sine wave (AC mode) |
| Transfer Time | 2ms typical |
BATTERY
| Type | 12V/8.2AH x 1 |
| Backup Time | 8 - 20 mins depending on load |
| Recharge Time | 2-4 hours recover to 90% capacity |
INTERFACE & INDICATORS
| Interface | RS232, USB port, RJ45/RJ11 (Optional) |
| Display | LED/LCD Optional |
| Alarm | Batt. Mode, low battery, overload, fault, etc. |
PROTECTION/MONITORING
| Short Circuit Protection | Yes (Line mode & battery mode) |
| Surge Protection | Yes |
| Alarm | Audible & Visual |
| Overload Protection | Line mode : 100 - 120% 1 min change to fault mode >120% change to fault mode immediatelyBattery mode : 100 - 120% 1 min change to fault mode >120% change to fault mode immediately |
| Intelligent Battery | Prevent overcharging of battery |
| Management | Protect battery and prolong battery life |
Real Panel
| 1. AC Mode Indicator Green LED Lighting 2. Battery Mode Indicator Battery Normal : Yellow LED Lighting and Blinking every 30s Battery Low : Yellow LED Lighting and Blinking every 2s 3. Overload and Fault Indicator Overload : Red LED Blinking every 2s Fault : Red LED Lighting 4. Power Switch 5. Power AC Input 6. Backup Outlets |
GAMDIAS ARGUS E4 ELITE MIDTOWER TG*1 / FAN*1 WHITE CASE
GAMDIAS-ARGUS-E4
GAMDIAS ARGUS E4 ELITE MIDTOWER TG*1 / FAN*1 WHITE CASE
Sync with 5V ARGB Motherboard
RGB Streaming Lighting
Tempered Glass Panel Swing Door
1 Built-in 120mm ARGB Rear Fan
Supports Motherboards up to ATX
Magnetic Dust Filter
Switch RGB Lighting Style with One Touch
Enameled White Painted Case
CASE
- Case Type MID Tower
- MB Support ATX、Micro-ATX、Mini-ITX
- Synchronization 5V 3-Pin Addressable Header
- CASE Color White
- Expansion Slots 7+3
- Material SPCC & ABS & Tempered glass
- Window Left
- Radiator Support Top: 240mm / Rear: 140mm、120mm
- Fan Support Top: 2 x 120mm 、2 x 140mm / Rear: 1 x 120mm 、1 x 140mm
- Pre-installed Fans Rear: 1 x 120mm ARGB Fan
- Drive Bays 2 x 3.5" or 1 x 2.5"+1 x 3.5"(HDD Cage) / 3 x 2.5"
- I/O Port USB 3.0 x1、USB 2.0 x2、HD Audio x1、LED control x1
- Clearance CPU cooler height limitation: 190mm VGA length limitation: 340mm PSU length limitation: 180mm
- Dimension (L x W x H) 393 x 230 x 460 mm
- Net Weight 5.4 kg / 11.9 lb
GAMDIAS ATHENA P1 MIDTOWER TG*1 / FAN*4 BLACK CASE
ATHENA-P1
GAMDIAS ATHENA P1 MIDTOWER TG*1 / FAN*4 BLACK CASE
4 Built-in High Performance 120mm ARGB Fans
Perforated Mesh Front Panel
Underglow Light Strip Design
Optimized Cable Management
Extensibility for Airflow Side Intake
Velcro Included
Cable Cover Shroud
Adjustable Graphic Card Support
Additional SSD Bracket
Sync with 5V ARGB Motherboard
Tool-Free Installation Tempered Glass Window
Support Mini-ITX, Micro-ATX and ATX Motherboards
CASE
Case Type MID Tower
MB Support ATX、Micro-ATX、Mini-ITX
Synchronization 5V 3-Pin Addressable Header
CASE Color Black
Expansion Slots 7
Material SPCC & ABS & Tempered glass
Window Left
Radiator Support Top: 360mm、280mm、 240mm / Front: 360mm、280mm、240mm / Rear: 120mm
Fan Support Top: 3 x 120mm 、2 x 140mm / Front: 3 x 120mm、3 x 140mm/ Rear: 1 x 120mm
Pre-installed Fans Front: 3 x 120mm ARGB Fans/ Rear: 1 x 120mm ARGB Fan
Drive Bays 2 x 3.5" or 1 x 2.5"+1 x 3.5"(HDD Cage)
2 x 2.5"(HDD Cage) + 2 x 2.5'' (SSD Bracket)
I/O Port USB 3.0 x1, USB 2.0 x1, Type C x 1, HD Audio x1, LED Control x1
Clearance CPU cooler height limitation:170mm
VGA length limitation:405mm
PSU length limitation:210mm
Dimension (L x W x H) 465 x 220 x 485 mm
18.3 x 8.6 x 19.8 inch
Net Weight 8.7 kg / 19.18 lb
GAMDIAS ATHENA M6 LITE , ATX Mid Tower Gaming Case with Side Tempered Glass, 4X 120mm ARGB Case Fans , Magnetic Dust Filter – BLACK
ATHENA M6 LITE GAMING CASE BLACK
GAMDIAS ATHENA M6 LITE , ATX Mid Tower Gaming Case with Side Tempered Glass, 4X 120mm ARGB Case Fans and Sync with 5V RGB Motherboard ,Mesh Front Panel , Perforated Chassis , Magnetic Dust Filter
-
Immersive Underglowing RGB Gaming Experience:
-
The Best Air Flow Gaming Cases:
-
Easy and Clean Cable Management:
-
Great Expandability for Your System Config.:
- ONE CLICK. SYNC ALL:
Expert Specs :
- Case Type : MID Tower
- MB Support : ATX、Micro-ATX、Mini-ITX
- Synchronization : 5V 3-Pin Addressable Header
- CASE Color : Black
- Expansion Slots : 7
- Material : SPCC & ABS & Tempered glass
- Window : Left
- Radiator Support : Top: 240mm / Front: 360mm、280mm、240mm / Rear: 120mm、140mm
- Fan Support : Top: 2 x 120mm 、2 x 140mm / Front: 3 x 120mm、2 x 140mm/ Rear: 1 x 120mm / 1 x 140mm
- Pre-installed Fans : Front: 3 x 120mm ARGB Fans/ Rear: 1 x 120mm ARGB Fan
- Drive Bays : 2 x 3.5" or 1 x 2.5"+1 x 3.5"(HDD Cage) / 2 x 2.5"
- I/O Port : USB 3.0 x1、USB 2.0 x2、HD Audio x1、LED control x1
- Clearance : CPU cooler height limitation: 190mm VGA length limitation: 340mm PSU length limitation: 180mm
- Dimension (L x W x H)410 x 230 x 477 mm
- Net Weight5.89 kg / 12.99 lb
FROM THE MANUFACTURER :
ATHENA M6 LITE GAMING CASE BLACK
UNRESTRICTIVE BRILLIANCE- Sync with Motherboard
- Triple-sided Underglow
- 4 Built-in 120mm ARGB Fans
- Seamless Tempered Glass Window
- Mesh Front Panel
- Perforated Chassis
- Magnetic Dust Filter
UNRESTRICTIVE BRILLIANCE
ATHENA M6 LITE is a mid-tower case with a unique lighting profile focused on optimizing airflow performance. The case features a panoramic mesh front panel, four built-in 120mm ARGB fans, and triple-sided ARGB light strips to leverage airflow performance and create ambient underglow lighting effects.EXTENSIVE MESH PANEL
The ATHENA M6 LITE comes with a pillar-shaped mesh front panel with room for three 120mm RGB fans, implemented with all-around perforated ventilation. The case is designed to create an environment with unrestrictive airflow to meet next-generation cooling demands.HEIGHTENED AIRFLOW
The lower compartment of the chassis takes on a perforated design with the elevated case stands allowing massive air intake and exhaust on all sides of the case.3+1 ARGB FANS
The case is preinstalled with four high-performance hydraulic ARGB fans to create a synchronized setup while enhancing air intake and exhaust.SYNCHRONIZE AND DISPLAY
The ATHENA M6 LITE supports system-wide ARGB to compatible motherboards with lighting synchronization that controls the 4 built-in ARGB fans and 3 ARGB light strips with a single push of a button.SIMPLE AND ACCESSIBLE
The I/O is equipped at the top front of the case, featuring 2x USB port, 1x USB 3.0 port, LED lighting controls, and additional audio connectivity.COOLING SUPPORT
The case supports up to 6 fans and up to a 360mm radiator in the front and 240mm at the top.INTERIOR ACCOMMODATION
The ATHENA M6 LITE supports up to ATX motherboards and VGA cards with lengths up to 340mm.OUT OF SIGHT, OUT OF MIND.
The hidden compartment has ample room for cable management optimization, and accommodates PSU lengths up to 180mm.BRILLIANT AND CONCISE
The ATHENA M6 LITE focuses on high airflow and ARGB appearance with a mesh front panel, 4 ARGB fans, and triple underglow light strips. It also comes with dust filters on the top and bottom of the case to clean out dust easier than ever.Cougar GEX 1050 80 Plus Gold Fully Modular Certified PSU
High Efficiency for Power Saving
GEX1050 features a highly efficient design that surpasses the 80Plus Gold standard, to help you save money on your electricity bill.
Perfect Cooling System with 0dB mode & HDB Fan
Using COUGAR’s exclusive 135mm silent fan, the advanced frame increase the concentration of air-flow and its fan curvature has been fine-tuned to reduce vibration at any loads.
Solid Durability with Japanese Electrolytic Capacitors
Firstly, GEX1050 has been designed and thoroughly tested to perform optimally in 40ºC working temperature environments.
Second, it includes 105°C Japanese capacitors for main and standby power to ensure keep providing computer with stable electrical supply.
Advanced Structure for Impeccable Stability
GEX1050’s LLC, DC-DC and Tri-Sense(3.3V, 5V, and 12V) design has been created to provide high-quality outputs, with an extremely tight 2% voltage regulation to deliver a stabler operation.
Perfectly Support GeForce RTX™ 30 Series GPU
The GEX1050 was designed for high end gamers and complicated media workers which can perfectly supporting RTX 30 series GPU and provide stable performance.
Features
80PLUS Gold Certified
Up to 92% efficiency power conversion to cut down your electricity bill
Fully Modular Power Supply Unit
Connect only the cables you need for less clutter and better airflow
Durable HDB Fan
Hydro Dynamic Bearing Fan: Extended durability and lower noise levels
Superior fan Curve Tuning
Advanced technology for noise minimization
Flawless Operation at 40°C
Powerful performance at 40°C ambient temperature
Compatible with The Lastest PC Technology
Created for user with current and next-generation multi-core CPU platforms
Support PCI Express 4.0 Next Generation Graphics Cards with 8(6+2) Pin PCI-E Connector
Strong Safeguards : OCP, OPP, OVP, UVP, SCP & OTP
Maximum safety for your key system components
Specifications
| Model Name | AC Input | DC output | |||||
| +3.3V | +5V | +12V | -12V | +5Vsb | Total | ||
| GEX1050 | AC100-240V 47-63Hz 13-6A | 20A | 20A | 87.5A | 0.3A | 3A | 1050W |
| 120W | 1050W | 3.6W | 15W | ||||
| Connector | Main | CPU | Peripherals | S-ATA | PCI-E | |
| Pin | 24(20+4) Pins | 8(4+4) Pins | 8 Pins | 4 Pins | 5 Pins | 8(6+2) Pins |
| GEX1050 | 1 | 1 | 1 | 4 | 12 | 8 |
Thermal Grizzly NVMe M.2 SSD Cooler
Product Description
Thermal Grizzly
The Thermal Grizzly M.2 SSD Cooler is a passive cooling solution for next generation form factor SSDs. It's no secret that modern M.2 NVMe SSDs, in particular, get hot when in demanding use, so the speed of the drive has to be slowed down. To counteract this problem and get full performance, the Grizzly professionals have developed a compact passive cooler that significantly reduces the temperatures of an M.2 SSD.
Thermal Grizzly M.2 SSD Cooler
- Ideal heat dissipation solution for the NGFF SSDs. Forget about overheated storage and reduced transfers. Compatible with drives of the many manufacturers such as Samsung, Kingston, ADATA.
- Installation is simple. Just screw the cooler to the drive! You can be sure that the heat sink is firmly attached. It is more reliable and less problematic than mounting clips or rubber bands, as in the case of competing solutions.
- Elegant design consists of black, aluminum heatsink, will match well with every motherboard.
At a Glance:
- Black Passive Cooler for M.2 SSDs.
- Lower temperatures to reduce speed limitations.
- Compatible with one-sided M.2 NVMe SSDs (2280).
- Easy installation.
The sophisticated design of the cooler consists of a front cover and a backplate as well as two matching Minus Pad 8 high performance thermal pads. Note that the Thermal Grizzly M.2 SSD Cooler is only compatible with one-sided, 22-millimeter-long M.2 NVMe SSDs that are 80 millimeters long, and that M.2 (NGFF) connectors with a height of 4.2 millimeters must be used.
Specifications:
- Color: Black
- all one-sided M.2 NVMe SSDs (22 mm width, 80 mm lenght)
- M.2 (NGFF) Connector must be 4.2 mm height
- 1x Front cover
- 1x Back plate
- 1x thermal pad 0.5 mm
- 1x thermal pad 1 mm
DeepCool CC560 WH V2 Mid-Tower ATX PC gaming Case, 4X Pre-Installed 120mm LED Fans, Tempered Glass Side Panel, White
DEEPCOOL CC560 Gaming White ATX Case
DEEPCOOL CC560 White ATX Mid Tower Tempered Glass. Support Mini-ITX / mATX / ATX, 4x Pre installed 120mm LED Fans. CPU Cooler Upto 163mm, GPU Upto 370mm, 360mm Rad Supported, 7X PCI Slot. Front I/O: 2X USB, HD Audio
Expert Features
- CC560 WH mid-tower ATX case offers new and experienced builders a perfect start with great component compatibility and high-quality features.
- A well-ventilated chassis design with an airflow front panel and a large mesh top panel to ensure fresh air is circulating to cool down system components.
- Ensure great cooling ability with four pre-installed 120mm fans with bright LEDs and optimized airflow.
- Ample interior space to support multiple liquid cooling radiator configurations with room for 360mm/280mm radiators in front or 240mm on top.
- Showcase your system build with a clean and clear full-sized tempered glass side panel window
DEEPCOOL CC560 Gaming White ATX Case
Expert Spec
| Product Dimensions | 416×210×477mm(L×W×H) |
| Net Weight | 5.25Kg |
| Materials | ABS+SPCC+Tempered Glass |
| Motherboard Support | Mini-ITX / Mico-ATX / ATX |
| Front I/O Ports | USB3.0×1、USB2.0×1、Audio×1 |
| 3.5" Drive Bays | 2 |
| 2.5" Drive Bays | 2 |
| Expansion Slots | 7 Slots |
| Pre-Installed Fans | Front: 3×120mm Rear: 1×120mm |
| Fan Support | Front: 3×120 / 2×140mm Top: 2×120 / 2×140mm Rear: 1×120mm |
| Radiator Support | Front: 120/140/240/280/360mm Top: 120/240mm Rear: 120mm |
| CPU Cooler Height Limit | 163mm |
| GPU Length Limit | 370mm |
| Power Supply Type | ATX PS2（maximum length: 170mm） |
| EAN Code | 6933412714897 |
| PN Code | R-CC560-WHGAA4-G-1 |
