| VEIKK , A50 , DRAWING , TABLET , 10 |
{attribute:VEIKK , A50 , DRAWING , TABLET , 10 |
|---|
Back to products
TPLINK EAP225-OUTDOOR AC1200 WIRELESS MU-MIMO GIGABIT IN/OUT DOOR ACCESS POINT
Original price was: $ 125.00.$ 114.00Current price is: $ 114.00.
TPLINK OMADA EAP110-OUT 300MBp WIRELESS N OUTDOOR ACCESS POINT
$ 58.00
Additional information
Related products
TPLINK JETSTREAM 24 PORT GIGABIT L2+MANAGED SWITCH WITH 4 SFP SLOTS
TL-SG3428
| HARDWARE FEATURES | |
|---|---|
| Interface | • 24× 10/100/1000 Mbps RJ45 Ports • 4× Gigabit SFP Slots • 1× RJ45 Console Port • 1× Micro-USB Console Port |
| Fan Quantity | Fanless |
| Power Supply | 100-240 V AC~50/60 Hz |
| Dimensions ( W x D x H ) | 17.3 × 7.1 × 1.7 in (440 × 180 × 44 mm) |
| Mounting | Rack Mountable |
| Max Power Consumption | • V1: 19.22 W (110 V/60 Hz) • V2: 19.9 W (220 V/50 Hz) |
| Max Heat Dissipation | • V1: 65.58 BTU/hr (110 V/60 Hz) • V2: 67.73 BTU/h (220 V/50 Hz) |
| PERFORMANCE | |
|---|---|
| Switching Capacity | 56 Gbps |
| Packet Forwarding Rate | 41.66 Mpps |
| MAC Address Table | • V1: 8K • V2 and above: 16K |
| Packet Buffer Memory | 12 Mbit |
| Jumbo Frame | 9 KB |
| SOFTWARE FEATURES | |
|---|---|
| Quality of Service | • 8 priority queues • 802.1p CoS/DSCP priority • Queue scheduling - SP (Strict Priority) - WRR (Weighted Round Robin) - SP+WRR • Bandwidth Control - Port/Flow based Rating Limiting • Smoother Performance • Action for Flows - Mirror (to supported interface) - Redirect (to supported interface) - Rate Limit - QoS Remark |
| L2 and L2+ Features | • Link Aggregation - Static link aggregation - 802.3ad LACP - Up to 8 aggregation groups and up to 8 ports per group • Spanning Tree Protocol - 802.1d STP - 802.1w RSTP - 802.1s MSTP - STP Security: TC Protect, BPDU Filter, BPDU Protect, Root Protect, Loop Protect • Loopback Detection - Port-based - VLAN based • Flow Control - 802.3x Flow Control - HOL Blocking Prevention • Mirroring - Port Mirroring - CPU Mirroring - One-to-One - Many-to-One - Tx/Rx/Both |
| L2 Multicast | • Supports 511 (IPv4, IPv6) IGMP groups • IGMP Snooping - IGMP v1/v2/v3 Snooping - Fast Leave - IGMP Snooping Querier - IGMP Authentication • IGMP Authentication • MVR • MLD Snooping - MLD v1/v2 Snooping - Fast Leave - MLD Snooping Querier - Static Group Config - Limited IP Multicast • Multicast Filtering: 256 profiles and 16 entries per profile |
| VLAN | • VLAN Group - Max 4K VLAN Groups • 802.1q Tagged VLAN • MAC VLAN: 30 Entries • Protocol VLAN: Protocol Template 16, Protocol VLAN 16 • GVRP • VLAN VPN (QinQ) - Port-Based QinQ - Selective QinQ • Voice VLAN |
| Access Control List | • Time-based ACL • MAC ACL - Source MAC - Destination MAC - VLAN ID - User Priority - Ether Type • IP ACL - Source IP - Destination IP - Fragment - IP Protocol - TCP Flag - TCP/UDP Port - DSCP/IP TOS - User Priority • Combined ACL • Packet Content ACL • IPv6 ACL • Policy - Mirroring - Redirect - Rate Limit - QoS Remark • ACL apply to Port/VLAN |
AC1200 Wireless MU-MIMO VDSL/ADSL Modem Router – VR400
- Speedy WiFi – Experience superb wireless connections with 867 Mbps (5 GHz) + 300 Mbps (2.4 GHz) dual band WiFi
- Superior Range – Two fixed omnidirectional antennas with Beamforming technology provide stable wireless connections and optimal coverage
- Versatile Connectivity – Fully compatible with VDSL2/ADSL2+/ADSL2/ADSL standards, as well as fiber, cable, and 3G/4G internet services
- Whole-Home Coverage with OneMeshTM – Works alongside TP-Link OneMeshTM products to create a flexible Mesh network
- MU-MIMO Technology – Simultaneously transfers data to multiple devices, reducing wait times
- Full Gigabit Ports – Take full advantage of broadband speeds up to 1 Gbps
- Tether App– TP-Link Tether provides the easiest way to access and manage your router on your iOS and Android devices
MODEM Fiber Optic Isolator FTTH Gpon ONU Modem F660 V6.0 F609 V5.2
MODEM Fiber Optic Isolator
| Type: | Fiber Optic Isolator |
|---|---|
| Wiring Devices: | Integrated Wiring |
| Certification: | CE, RoHS, GS |
EXPERT Highlights:
- Plug-and-play (PnP): Internet, IPTV and VoIP services can be deployed by one click on the NMS and on-site configuration is not required.
- Remote diagnosis: Remote fault locating is implemented by the loop-line test of POTS ports, call emulation and PPPoE dialup emulation initiated by the NMS.
- Link monitoring: E2E link detection is achieved using 802.1ag Ethernet OAM.
- High speed forwarding: GE line rate forwarding in the bridging scenario and 900 Mbit/s forwarding in the NAT scenario.
- Green energy-saving: 25% power consumption is saved with highly integrated system on chipset (SOC) solution, in which, a single chip integrates with PON, voice, gateway and LSW modules.
HDMI KVM OVER IP EXTENDER WITH 2 PORTS USB
HIGH DEFINITION MULTIMEDIA INTERFACE / HDMI KVM OVER IP EXTENDER WITH 2 PORTS USB / TRANSMITTER & RECEIVER
Product Introduction 1. Modular design to assemble for Extender, Splitter, Matrix and Switcher for up to 1x256 (N TO 1 is not supported) applications. 2. Extends 4K 30P, 1080 60P HDMI signal up to 180m (600ft) over a single Cat5E cable, 100M Ethernet. 3. Use conventional Ethernet Switch for extension and distribution, and can be cascaded by the Ethernet switches for longer distance. 4. Supports IR (20KHz~60KHz) extension. 5. Supports Stereo Audio over IP, independent to HDMI extension. 6. Supports USB (Keyboard, Mouse) extension over IP and KVM switch function by button selection. 7. Supports EDID pass-through and Transmitter resolution pass-through, including most popular 16:9, 16:10, 4:3 resolution and timing (Support list please refer to appendix). 8. Supports Graphic/ Video mode selection and the latency is between 0.06-0.10 seconds. 9.Power supply is 5V2A with TYPE-C port. 10.The shell is made of aluminum alloy with fixed holes for easy installation.Note: N TO N mode means that multiple TXs are connected to multiple RXs through the Ethernet switch. Turn to SP and press the ID to pair the IDs. The indicator light of the same group should be the same and different from that of other groups Note: USB KVM supports only mouse and keyboard. Other USB devices are not supported.
Accessories INCLUDED IN THE BOX :- 1pair of HDMI extender - Power Adapter 5V/2A x 2, - IR TX Cable x 2, - IR RX Cable x 2, - USB2.0 male to male cable x 1, - User Manual X1,
Appearance size:
Length* Width * Height: 139*54*24(mm) Weight: 137g (for 1pc)
Note: Please use the original power supply of the product. If the signal is weak or intermittently interrupted, the network cable length may exceed the required range. If the mouse and keyboard are stuck, power it on again.
TPLINK MR6400 300MBPS WIRELESS N 4G LTE ROUTER
TL-MR6400
300 Mbps Wireless N 4G LTE Router
- Cutting-edge 4G network – share internet access with up to 32 Wi-Fi devices and enjoy download speeds of up to 150 Mbps
- Plug a SIM card and play – no configurations needed, compatibility of SIM cards in 100+ countries are assured by years of field tests
- Two detachable advanced LTE antennas – enjoy stable and efficient connections to every device thanks to the two external antennas
- Wi-Fi router mode – plug an Ethernet cable into the LAN/WAN port for flexible access as a backup option if you can't get a 4G connection
Gigabit Ethernet Fiber Media Converters, a pair of 10/100/1000M RJ45 to 1000M Bi-Directional Single-Mode SC Fiber
- Optical Port: 1.25Gbps, 1310nm/1550nm, Single-Mode SC Optic Fiber UP TO 3K
- RJ45 Port: Auto-detective 10M/100M/1000Mbps Cat5 Cable
- Complies with IEEE IEEE 802.3/802.3u/802.3z/802.3ab
- Connect the power cord to the Converter and check that the Power LED lights up. The TP Act and FX Act LEDs will turn on when all the cable connections satisfied
- What In Box: A pair of Ethernet Media Converter, 2x DC Power Adapter, 1x Product Manual.