Hard Drive Docking Station DUPLICATOR CLONER
Intel 14th Gen Core i7-14700K 33M CASHE *** BOXED
Original price was: $ 330.00.$ 318.00Current price is: $ 318.00.
MSI MAG FORGE 112R I/O PORTS CASE - BLACK
Original price was: $ 78.00.$ 72.00Current price is: $ 72.00.
UGREEN USB 3.0 Dual Bay SATA Hard Drive Docking Station DUPLICATOR / CLONER – CM198
$ 45.00
Description
Additional information
| VEIKK , A50 , DRAWING , TABLET , 10 |
{attribute:VEIKK , A50 , DRAWING , TABLET , 10 |
|---|
Related products
GAMDIAS BOREAS E1-410 WHITE CPU AIR COOLER
BOREAS-E1-410-WH
GAMDIAS BOREAS E1-410 WHITE CPU AIR COOLER
White Edition
High Airflow PWM Fan
4 Copper Heat Pipes with Direct Contact Technology
Customize addressable RGB lighting via motherboard manufacturer sync software
Built-in rainbow wave LED effect
High Cooling Performance Thick Base Plate
Hydraulic Bearing
Universal Socket Mounting Kits
AIR COOLER - FAN
- Fan Dimensions120 x 120 x 25 mm
- Fin MaterialAluminum
- Fan Speed800-2000 RPM ±10%
- Air Flow70.2CFM
- Air Pressure2.7 mmH2O
- Noise Level10-31 dBA
- BearingHydraulic
AIR COOLER
- Heatpipe MaterialCopper
- Product Dimensions120 x 73.8 x 154.5 mm
- Connector4 Pin PWM
- Rated Voltage12 V (Fan) / 5V(LED)
- Support Motherboard RGB Sync Connectors5V 3-pin Addressable (Digital) RGB Header
- CompatibilityLGA2066 / 2011-v3 / 2011 / 1700 / 1151 / 1150 / 1155 / 1156 / 1366 / 1200 / AM5 / AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2+ / FM2 / FM1
1850W ATX Modular Mining PC Power Supply 6 GPU
T.F.SKYWINDINTL 1800w Power Supply RX480 PSU Asic Bitcoin Miner Power Supply 1800W Atx Pico PSU Mining ETH ETC XMR ZEC BTB BTC
INTERFACE
20+4P *1
CPU 4+4P *1
6+2P* 12
IDE* 5
SATA *8
Features:
1.Support 6 pieces graphics card(Power is lower than 1800W)
2.1800W power supply, high efficiency,very quiet,stable performance.
3.With new big capacitor and big magnetic ring material, the performance is very stable.
4:with one year warrety
Package :
1800w psu *1
power tester *1
power cord *1
Please pay attention :
1: this psu is design forminer Mining,it can be used in normal computer but it will a little noisy when you use in normal computer , if you want a very quiet computer psu , do not buy this one and contact our sales to advise you one .
Corsair MP600 Elite M.2 2280 1TB PCI-Express 4.0 x4 , Internal NVMe 1.4 High-Density 3D TLC NAND Internal Solid State Drive Up to 7000 MB/sec (SSD) | BLACK F1000GBMP600ENH
Expert Features
- EXTREME PCIe 4.0 STORAGE PERFORMANCE : Sequential Read/Write Speed Up to 7,000/6,500 MB/s. The PCIe Gen 4 x4 controller delivers phenomenal read, write, and response times that leave standard M.2 SSDs in the dust.
- YOUR PC MADE FASTER : Load games, boot Windows, open and transfer files, all faster than ever.
- HIGH-SPEED PCIe 4.0 X4 NVMe M.2 INTERFACE : Leveraging PCIe Gen4 NVMe 1.4 technology for maximum bandwidth, the MP600 ELITE delivers incredible storage performance.
- HIGH-DENSITY 3D TLC NAND : Provides the ideal mix of performance and endurance to ensure that your drive will last and perform well through many years of use.
- COMPACT M.2 2280 FORM-FACTOR : Fits directly into most motherboards and laptops, with no heatsink attached for maximum compatibility.
- Outstanding Endurance: Rated for up to 1,200TB Written, the MP600 ELITE’s longevity ensures that it reliably stores your data through many years of use.
Expert Specs
| Brand | Corsair |
|---|---|
| Series | MP600 Elite |
| Model | CSSD-F1000GBMP600ENH |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
|---|---|
| Capacity | 1TB |
| Memory Components | 3D TLC |
| Interface | PCI-Express 4.0 x4, NVMe 1.4 |
| Protocol | NVMe 1.4 |
| Controller | PS5021-E21T |
| Encryption | AES 256-bit encryption |
| Max Sequential Read | Up to 7000 MBps |
|---|---|
| Max Sequential Write | Up to 6200 MBps |
| 4KB Random Read | Up to 1,000,000 IOPS |
| 4KB Random Write | Up to 1,000,000 IOPS |
| Terabytes Written (TBW) | 600TB |
| MTBF | 1,500,000 hours |
| HeatSink | without HeatSink |
| Features |
|
|---|
| Power Consumption (Idle) | < 50 mW |
|---|---|
| Power Consumption (Active) | Active Read: 5.6W Active Write: 8.5W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Operating Humidity | 40°C 90% RH |
| Max Shock Resistance | 1500G |
| Max Vibration Resistance | 20Hz~80Hz/1.52mm |
| Height | 3.00mm |
|---|---|
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 8.2g |
Lexar NM620 M.2 2280 PCIe Gen3x4 NVMe 512GB Internal SSD, Up to 3500MB/s Read & 3000MB/s Write Speeds, 3D NAND for PC Enthusiasts and Gamers (LNM620X512G-RNNNG) BLACK
M.2 2280 PCIe Gen3x4 NVMe 512GB Internal SSD
LNM620X512G-RNNNG
M.2 2280 PCIe Gen3x4 NVMe 512GB Internal SSD
Lexar NM620 M.2 2280 PCIe Gen3x4 NVMe 512GB Internal SSD, Up to 3500MB/s Read & 3000MB/s Write Speeds, 3D NAND for PC Enthusiasts and Gamers (LNM620X512G-RNNNG) BLACK
EXPERT FEATURES
Next-Level performance for intensive workloads
- Designed for intensive workloads, the Lexar NM620 M.2 2280 PCIe Gen3x4 NVMe SSD offers next-level performance that puts you in the computing fast lane with speeds up 3500MB/s read and 3000MB/s write1.
- It’s supported by the PCIe Gen3x4 NVMe 1.4 technology standard and built with the latest 3D NAND flash.
Ideal for demanding creative and gaming
- With speeds of up to 3500MB/s read, enjoy 6x the speed of SATA SSDs3.
- The NM620 puts you in the computing fast lane and offers impressive performance for demanding creative workstations and gaming experiences.
Features LDPC for added reliability
- Low-Density Parity Check (LDPC) technology makes data transfers more reliable than ever by fixing data errors before they have a chance to slow you down.
Built to last
- Unlike traditional hard disk drives, the NM620 SSD has no moving parts, so it’s built to last.
- On top of that, it’s also shock and vibration resistant2, making it one robust and reliable SSD.
Efficient
Reduced power consumption and cooler operation makes the battery life last longer than a traditional hard drive.Rigorously Tested
- All Lexar products undergo extensive testing in the Lexar Quality Labs, facilities with thousands of different cameras and digital devices to ensure performance, quality, compatibility, and reliability.
- Form Factor : M.2 2280
- Interface : PCIe Gen3x4
- Performance : 512GB —sequential read up to 3500MB/s, write up to 3000MBs IOPS: up to 300/256K
- Operating Temperature : 0°C to 70°C (32°F to 158°F)
- Storage Temperature : -40°C to 85°C (-40°F to 185°F)
- Dimension (L x W x H) : 80 mm x 22 mm x 2.25 mm / 3.15” x 0.87” x 0.09”
- Weight : 9g
- Shock Resistant : 1500 G, duration 0.5ms, Half Sine Wave
- Vibration Resistant : 10~2000Hz, 1.5mm, 20 G, 1 Oct/min, 30min/axis(X,Y,Z)
- NAND flash : 3D TLC
- MTBF : 1,500,000 Hours
LNM620X512G-RNNNG
M.2 2280 PCIe Gen3x4 NVMe 512GB Internal SSD
Lexar NM620 M.2 2280 PCIe Gen3x4 NVMe 512GB Internal SSD, Up to 3500MB/s Read & 3000MB/s Write Speeds, 3D NAND for PC Enthusiasts and Gamers (LNM620X512G-RNNNG) BLACK 
Noctua NH-D15S CPU Cooler Heatsink Chromax Edition “AWARD WINNING”
Noctua NH-D15S CPU Cooler Heatsink Chromax Edition "AWARD WINNING"
NA-HC4 Tailored to provide superior RAM and PCIe compatibility, the NH-D15S is an asymmetrical single fan version of Noctua’s award-winning flagship model, the NH-D15. Thanks to its asymmetrical design, the NH-D15S clears the top PCIe slot on most µATX and ATX motherboards. At the same time, the single fan setup and recessed lower fins guarantee 100% RAM compatibility with memory modules of up to 65mm height. Users who have sufficient room can also upgrade the cooler with either a 120mm or round 140mm fan on the front fin stack for further improved performance in dual fan mode. Topped off with the trusted, pro-grade SecuFirm2™ multi-socket mounting system, Noctua’s proven NT-H1 thermal compound , the NH-D15S forms a complete premium quality solution that combines dual tower efficiency with excellent compatibility and flexible upgrade options.Details
High-compatibility version of NH-D15
Compared to the award-winning NH-D15, the S-version uses an off-set, asymmetrical layout and a single instead of dual NF-A15 fans. This allows the NH-D15S to provide state-of-the-art heatsink performance while maintaining superior RAM and PCIe compatibility.
Excellent RAM compatibility
Thanks to its recessed lower fins, the NH-D15S provides 66mm clearance for tall memory heatsinks, making it compatible with most high end modules on the market. As the lower fins are recessed on both sides of the heatsink, compatibility is excellent on both Intel and AMD sockets.
Asymmetrical layout for better PCIe compatibility
As many current motherboards have the top PCIe x16 slot sitting close to the socket, bigger heatsinks tend to block it. Due to its asymmetrical layout, the fin-stack of the NH-D15S is off-set towards the upper edge of the motherboard when installed in standard orientation. This allows it to clear the top PCIe x16 slot on most current µATX and ATX motherboards.*
NF-A15 140mm fan
Complying with Noctua's AAO standard and featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A15 has quickly built up a reputation as one of the best 140mm fans on the market.
Dual-fan ready
Using the supplied extra fan clips, the NH-D15S can be upgraded with either a second round-frame 140mm fan with 120mm mounting holes (such as the NF-A15) for maximum performance or a common 120mm fan (such as the NF-F12) for improving performance while maintaining compatibility with RAM modules of up to 45mm height.
PWM support and Low-Noise Adaptor
The NF-A15 premium fan supplied with the NH-D15S supports PWM for convenient automatic speed control through the motherboard. In addition, the maximum fan speed can be reduced from 1500 to 1200rpm using the supplied Low-Noise Adaptor for even quieter operation.
Excellent component cooling
Extending below the fin-stacks, the large NF-A15 fan not only contributes to the superb CPU cooling capabilities of the NH-D15S but also provides massive airflow over surrounding motherboard components and heatsinks, thus ensuring excellent component cooling performance.
SecuFirm2™ mounting system
Noctua's SecuFirm2™ mounting systems have become synonymous with quality, safety and easy installation. Supporting Intel LGA1851, LGA1700 (since 2021), LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) as well as AMD AM5 and AM4 (since 2019), the SecuFirm2™ mounting included with the NH-D15S is straightforward to install, provides perfect contact pressure and will stand the test of time even under heavy use.
Compatibility with past and future sockets
Complying with the open SecuFirm™ standard, the NH-D15S can be made compatible with the older LGA1366 and LGA775 sockets using the optional NM-I3 mounting kit, which is provided by Noctua free of charge. If technically possible, Noctua will also provide upgrade kits for future sockets.
NT-H1 thermal compound
Having received more than 100 awards and recommendations from hardware journalists around the world, Noctua's NT-H1 is a proven professional grade TIM solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability.
Noctua products are renowned for their impeccable quality and outstanding longevity. Like all Noctua fans, the supplied NF-A15 features an MTTF rating of more than 150,000 hours and the entire NH-D15S package.
Cooler Specification
Intel LGA1851, LGA1700, LGA1200, LGA1156, LGA1155, LGA1151, LGA1150 & AMD AM5, AM4
(Current socket compatibility applies to all coolers purchased since Q4 2021. For older coolers, please refer to this chart.)
Height (without fan)
160 mm
Width (without fan)
150 mm
Depth (without fan)
135 mm
Height (with fan)
160 mm
Width (with fan)
150 mm
Depth (with fan)
135 mm
Weight (with fan)
1150 g
Material
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
167
Max. TDP
see NSPR
Fan compatibility
140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25
Scope of delivery
- NF-A15 PWM premium fan
- NA-RC7 Low-Noise Adaptor (L.N.A.)
- Fan clips for second fan
- NT-H1 high-grade thermal compound
- SecuFirm2™ mounting kit
- Noctua Metal Case-Badge
FAN Specification
Model
Bearing
Max. rotational speed (+/- 10%)
1500 RPM
Max. rotational speed with L.N.A. (+/- 10%)
1200 RPM
Min. rotational speed @ 20% PWM (+/-20%)
300 RPM
140,2 m³/h
115,5 m³/h
Max. acoustical noise
24,6 dB(A)
Max. acoustical noise with L.N.A.
19,2 dB(A)
Input power (max.)
1,56 W
Voltage range
12 V
MTTF
> 150.000 h