| VEIKK , A50 , DRAWING , TABLET , 10 |
{attribute:VEIKK , A50 , DRAWING , TABLET , 10 |
|---|
SanDisk 128GB Extreme Pro SDXC UHS-I 200MB/S
Original price was: $ 27.00.$ 21.00Current price is: $ 21.00.
TP-LINK RE450 AC1750 WIFI RANGE EXTENDER
Original price was: $ 70.00.$ 57.00Current price is: $ 57.00.
XIGMATEK POLIMA PSU EN42685 “REAL 300W”
$ 19.00
Additional information
Related products
BIOSTAR PCIe X1 USB 3.0 Crypto Mining Expansion Card
Product Overview Gaming in the Virtual Life & Mining in the Real World
Have you ever thought about the possibility to turn your gaming motherboard into a crypto mining base? Gaming and mining make you get achievements both in the virtual life and in the real world. The BIOSTAR Crypto Mining Card is designed for graphics card expansion to fully convert your gaming PC to a professional cryptocurrency mining rig that can handle much more graphics cards than those it could be equipped with.
Turn Your Gaming Motherboard into a Mining Base
The Crypto Mining Card with PCI-e x1 to 4 USB3.0 connectors is exclusively compatible with all BIOSTAR mining motherboards*, and select BIOSTAR gaming motherboards* and including the specific motherboards as following: RACING H170GT3, GAMING H170T, Hi-Fi H170S3H, Hi-Fi B150S1, Hi-Fi B150S1 D4, and TB150 PRO. To increase the mining profitability, this Crypto Mining Card can let mining enthusiasts set up their mining machine up to 8 slots for TB150 PRO to utilize more GPUs for more mining power**. Moreover, it can return your investment on your system by giving you the flexibility to create a mining rig to generate income from mining popular cryptocurrency like Bitcoin, Ethereum or Zcash.
Maximum Total Graphics Cards for Mining When Used Inconjunction with the Crypto Mining Card:
• Racing H170GT3 + Crypto Mining Card = Up to 7 Graphics Cards.
• GAMING H170T + Crypto Mining Card = Up to 7 Graphics Cards.
• Hi-Fi H170S3H + Crypto Mining Card = Up to 7 Graphics Cards.
• Hi-Fi B150S1 + Crypto Mining Card = Up to 6 Graphics Cards.
• Hi-Fi B150S104 + Crypto Mining Card = Up to 6 Graphics Cards.
• TB150 PRO + Crypto Mining Card = Up to 8 Graphics Cards. Features • BIOSTAR Crypto Mining Card turns you gaming machine crypto currency mining system, or expands your existing mining setup.
• Exclusively compatible with all BIOSTAR Mining Motherboards* & select BIOSTAR Gaming Motherboards*.
• Converts one PCIe x1 slot into four USB 3.0 PCIe connectors, so you can connect up to four USB PCIe riser cards**.
• Gives you the flexibility to use existing hardware to start Crypto mining, or increase the number of graphics cards in your current mining rig for maximum profitability.
• Powered by 1x 4-pin Molex Peripheral Connector.
Dual 24-Pin ATX Power Supply Motherboard Adapter Cable for Using Two PSU’s by Cryptosaur Gear MINING
no warranty on all mining parts and we are not responsible for any damage caused from using this item !!!!!
About this item
- PSU Splitter Run Two Power Supplies with One cable.
- No 24-Pin jumper needed. Power Supplies turn on at the same time.
- 30cm Length 18AWG Cable.
- Two Female 24-Pin ATX attachments for each PSU's 24-Pin Male cable.
- 1 Male 24-Pin ATX end for attachment to your Motherboard.
Thermal Grizzly Aeronaut 8.5 W/M · K 1G Heat Sink
Thermal Grizzly Aeronaut Thermal Paste 1 Gram Model TG-A-001-RS
Features :
Aeronaut thermal grease is the ideal beginner’s product with high effectiveness. Great surface protection, as well as good heat transfer capabilites make Aeronaut the ideal choice for users who want to optimize their cooling solution in an effective way, or maybe want to use an alternative to the thermal grease included with their hardware, with a remarkable cost effectiveness to boot.
very good thermal conductivity
long-term durability
no curing
no electrical conductivity
applicable with aluminum (warning is for Conductonaut only!)
Specs:
Thermal Conductivity 8,5 W/mk
Thermal Resistance 0,0129 K/W
Electrical Conductivity 0 pS/m
Viscosity 110160 Pas
Specific Weight 2,6g/cm3
Temperature -150 °C / +200 °C
Capacity 1,5ml/3,9 g 3ml/7,8g
UPS PROLINK Super Fast Charging 650A 350WATT
GENERAL
| Capacity | 650VA |
| Dimension (mm) | 286 x 96 x 138 (D x W x H) |
| Weight (kg) | 4.3 |
INPUT
| Voltage Range | 162 ~ 290VAC (Single boost) 140 ~ 300VAC (Double boost) |
| Frequency | 50Hz/60Hz (Auto-sensing) |
| Phase | Single + GND |
OUTPUT
| Voltage Range | 220-240VAC |
| Battery Mode | 220-240VAC |
| Frequency | 50Hz ±1% (Battery mode) |
| Waveform | Simulated sine wave (Battery mode) Sine wave (AC mode) |
| Transfer Time | 2ms typical |
BATTERY
| Type | 12V/8.2AH x 1 |
| Backup Time | 8 - 20 mins depending on load |
| Recharge Time | 2-4 hours recover to 90% capacity |
INTERFACE & INDICATORS
| Interface | RS232, USB port, RJ45/RJ11 (Optional) |
| Display | LED/LCD Optional |
| Alarm | Batt. Mode, low battery, overload, fault, etc. |
PROTECTION/MONITORING
| Short Circuit Protection | Yes (Line mode & battery mode) |
| Surge Protection | Yes |
| Alarm | Audible & Visual |
| Overload Protection | Line mode : 100 - 120% 1 min change to fault mode >120% change to fault mode immediatelyBattery mode : 100 - 120% 1 min change to fault mode >120% change to fault mode immediately |
| Intelligent Battery | Prevent overcharging of battery |
| Management | Protect battery and prolong battery life |
Real Panel
| 1. AC Mode Indicator Green LED Lighting 2. Battery Mode Indicator Battery Normal : Yellow LED Lighting and Blinking every 30s Battery Low : Yellow LED Lighting and Blinking every 2s 3. Overload and Fault Indicator Overload : Red LED Blinking every 2s Fault : Red LED Lighting 4. Power Switch 5. Power AC Input 6. Backup Outlets |
PCIe Riser Mining Card,Awakingdemi NGFF M.2 to USB 3.0
- he main control board uses the direct power supply mode of PCI-E interface, and does not need to connect the power line again
- The card slot is imported to ensure a better connection.
- A high quality connector is used for the card slot to make the card contact well.
- Multi layer shielded wire for PCI-E connector.
- The PCI-E connector is relatively wear-resistant and increases electrical conductivity.
Thermal Grizzly Carbonaut Thermal Pad, 32 × 32 × 0.2 mm
The high-tech carbon thermal pads of the Thermal Grizzly Carbonaut series can be used excellently as an alternative for thermal pastes from the medium performance segment. They have the exclusive advantage of being reusable, and they have a very elastic and adaptable surface with very high thermal conductivity. Even the smallest component differences can be compensated very well.
Maximum thermal conductivity
Constantly high performance
Reusable
Doesn't dry out
Flexible and easy to use
The Thermal Grizzly Carbonaut Pad is a thermal conduction pad made of carbon fiber. Its specially developed polymer gives the thermal pad its flexibility and its “soft gap filler” properties. The carbon fiber structure ensures excellent thermal conductivity. Thermal Grizzly Carbonaut is easily reusable. In addition, the Thermal Grizzly Carbonaut has a very high thermal conductivity, which it can develop even with very little pressure. The Thermal Grizzly Carbonaut remains constant in heat transfer performance.
Note: Carbonaut is electrically conductive.The Thermal Grizzly Carbonaut Pad is a thermal conduction pad made of carbon fiber. Its specially developed polymer gives the thermal pad its flexibility and its “soft gap filler” properties. The carbon fiber structure ensures excellent thermal conductivity. Thermal Grizzly Carbonaut is easily reusable. In addition, the Thermal Grizzly Carbonaut has a very high thermal conductivity, which it can develop even with very little pressure. The Thermal Grizzly Carbonaut remains constant in heat transfer performance. Note: Carbonaut is electrically conductive.
Thermal conductivity 62.5 W / mk
Strength 0.2mm
Temperature -250 ° C / +150 ° C
Model: TG-CA-32-32-02-R
RAM FURY KINGSTON 16GB 3200MHz DDR4 BLACK DESKTOP
From the manufacturer
Unleash Your Performance
Low-profile heat spreader
The sleek-looking new heat spreader is a great upgrade for your battle station’s style.
High-performance, cost-effective upgrade
Kingston FURY Beast DDR4 is the perfect choice for a system builder, or someone looking for an upgrade to jump start their sluggish system.
Intel XMP-Ready
Our engineers have predefined Intel Extreme Memory Profiles designed to maximize the performance of our memory modules reaching speeds up to 3733MHz.
Ready for AMD Ryzen
Get memory that’s ready for Ryzen and will seamlessly integrate with your AMD-based system. A reliable, compatible performance boost for your build.
Plug N Play – Automatic overclocking up to 2666MHz
A simple and easy Plug N Play upgrade, Kingston FURY Beast DDR4 will auto-overclock itself to the highest listed speed allowed by the system BIOS.