| VEIKK , A50 , DRAWING , TABLET , 10 |
{attribute:VEIKK , A50 , DRAWING , TABLET , 10 |
|---|
Xigmatek Thor T850M 850W 80+ Bronze PSU, Full Modular Design, 120mm FDB Fan, Active PFC, High-Efficiency Power Supply for Gaming & High-Performance Systems
$ 90.00
Additional information
Related products
GAMDIAS BOREAS E1-410 WHITE CPU AIR COOLER
BOREAS-E1-410-WH
GAMDIAS BOREAS E1-410 WHITE CPU AIR COOLER
White Edition
High Airflow PWM Fan
4 Copper Heat Pipes with Direct Contact Technology
Customize addressable RGB lighting via motherboard manufacturer sync software
Built-in rainbow wave LED effect
High Cooling Performance Thick Base Plate
Hydraulic Bearing
Universal Socket Mounting Kits
AIR COOLER - FAN
- Fan Dimensions120 x 120 x 25 mm
- Fin MaterialAluminum
- Fan Speed800-2000 RPM ±10%
- Air Flow70.2CFM
- Air Pressure2.7 mmH2O
- Noise Level10-31 dBA
- BearingHydraulic
AIR COOLER
- Heatpipe MaterialCopper
- Product Dimensions120 x 73.8 x 154.5 mm
- Connector4 Pin PWM
- Rated Voltage12 V (Fan) / 5V(LED)
- Support Motherboard RGB Sync Connectors5V 3-pin Addressable (Digital) RGB Header
- CompatibilityLGA2066 / 2011-v3 / 2011 / 1700 / 1151 / 1150 / 1155 / 1156 / 1366 / 1200 / AM5 / AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2+ / FM2 / FM1
Dual 24-Pin ATX Power Supply Motherboard Adapter Cable for Using Two PSU’s by Cryptosaur Gear MINING
no warranty on all mining parts and we are not responsible for any damage caused from using this item !!!!!
About this item
- PSU Splitter Run Two Power Supplies with One cable.
- No 24-Pin jumper needed. Power Supplies turn on at the same time.
- 30cm Length 18AWG Cable.
- Two Female 24-Pin ATX attachments for each PSU's 24-Pin Male cable.
- 1 Male 24-Pin ATX end for attachment to your Motherboard.
RAM KINGSTON FURY 8GB 3200MHz DDR4 NOTEBOOK
HF432S20IB2/8
From the manufacturer
Powerful SODIMM Performance
Maximize your memory and get a boost to your gaming, multitasking, and rendering.
Intel XMP-Ready Profiles
Our engineers have predefined Intel Extreme Memory Profiles designed to maximize the performance of our memory modules, reaching speeds up to 3200MHz..
Higher Performance with Low Power Consumption
Run your system cool and efficiently with Impact DDR4’s low 1.2V power draw.
BIOSTAR PCIe X1 USB 3.0 Crypto Mining Expansion Card
Product Overview Gaming in the Virtual Life & Mining in the Real World
Have you ever thought about the possibility to turn your gaming motherboard into a crypto mining base? Gaming and mining make you get achievements both in the virtual life and in the real world. The BIOSTAR Crypto Mining Card is designed for graphics card expansion to fully convert your gaming PC to a professional cryptocurrency mining rig that can handle much more graphics cards than those it could be equipped with.
Turn Your Gaming Motherboard into a Mining Base
The Crypto Mining Card with PCI-e x1 to 4 USB3.0 connectors is exclusively compatible with all BIOSTAR mining motherboards*, and select BIOSTAR gaming motherboards* and including the specific motherboards as following: RACING H170GT3, GAMING H170T, Hi-Fi H170S3H, Hi-Fi B150S1, Hi-Fi B150S1 D4, and TB150 PRO. To increase the mining profitability, this Crypto Mining Card can let mining enthusiasts set up their mining machine up to 8 slots for TB150 PRO to utilize more GPUs for more mining power**. Moreover, it can return your investment on your system by giving you the flexibility to create a mining rig to generate income from mining popular cryptocurrency like Bitcoin, Ethereum or Zcash.
Maximum Total Graphics Cards for Mining When Used Inconjunction with the Crypto Mining Card:
• Racing H170GT3 + Crypto Mining Card = Up to 7 Graphics Cards.
• GAMING H170T + Crypto Mining Card = Up to 7 Graphics Cards.
• Hi-Fi H170S3H + Crypto Mining Card = Up to 7 Graphics Cards.
• Hi-Fi B150S1 + Crypto Mining Card = Up to 6 Graphics Cards.
• Hi-Fi B150S104 + Crypto Mining Card = Up to 6 Graphics Cards.
• TB150 PRO + Crypto Mining Card = Up to 8 Graphics Cards. Features • BIOSTAR Crypto Mining Card turns you gaming machine crypto currency mining system, or expands your existing mining setup.
• Exclusively compatible with all BIOSTAR Mining Motherboards* & select BIOSTAR Gaming Motherboards*.
• Converts one PCIe x1 slot into four USB 3.0 PCIe connectors, so you can connect up to four USB PCIe riser cards**.
• Gives you the flexibility to use existing hardware to start Crypto mining, or increase the number of graphics cards in your current mining rig for maximum profitability.
• Powered by 1x 4-pin Molex Peripheral Connector.
Noctua NH-D15S CPU Cooler Heatsink Chromax Edition “AWARD WINNING”
Noctua NH-D15S CPU Cooler Heatsink Chromax Edition "AWARD WINNING"
NA-HC4 Tailored to provide superior RAM and PCIe compatibility, the NH-D15S is an asymmetrical single fan version of Noctua’s award-winning flagship model, the NH-D15. Thanks to its asymmetrical design, the NH-D15S clears the top PCIe slot on most µATX and ATX motherboards. At the same time, the single fan setup and recessed lower fins guarantee 100% RAM compatibility with memory modules of up to 65mm height. Users who have sufficient room can also upgrade the cooler with either a 120mm or round 140mm fan on the front fin stack for further improved performance in dual fan mode. Topped off with the trusted, pro-grade SecuFirm2™ multi-socket mounting system, Noctua’s proven NT-H1 thermal compound , the NH-D15S forms a complete premium quality solution that combines dual tower efficiency with excellent compatibility and flexible upgrade options.Details
High-compatibility version of NH-D15
Compared to the award-winning NH-D15, the S-version uses an off-set, asymmetrical layout and a single instead of dual NF-A15 fans. This allows the NH-D15S to provide state-of-the-art heatsink performance while maintaining superior RAM and PCIe compatibility.
Excellent RAM compatibility
Thanks to its recessed lower fins, the NH-D15S provides 66mm clearance for tall memory heatsinks, making it compatible with most high end modules on the market. As the lower fins are recessed on both sides of the heatsink, compatibility is excellent on both Intel and AMD sockets.
Asymmetrical layout for better PCIe compatibility
As many current motherboards have the top PCIe x16 slot sitting close to the socket, bigger heatsinks tend to block it. Due to its asymmetrical layout, the fin-stack of the NH-D15S is off-set towards the upper edge of the motherboard when installed in standard orientation. This allows it to clear the top PCIe x16 slot on most current µATX and ATX motherboards.*
NF-A15 140mm fan
Complying with Noctua's AAO standard and featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A15 has quickly built up a reputation as one of the best 140mm fans on the market.
Dual-fan ready
Using the supplied extra fan clips, the NH-D15S can be upgraded with either a second round-frame 140mm fan with 120mm mounting holes (such as the NF-A15) for maximum performance or a common 120mm fan (such as the NF-F12) for improving performance while maintaining compatibility with RAM modules of up to 45mm height.
PWM support and Low-Noise Adaptor
The NF-A15 premium fan supplied with the NH-D15S supports PWM for convenient automatic speed control through the motherboard. In addition, the maximum fan speed can be reduced from 1500 to 1200rpm using the supplied Low-Noise Adaptor for even quieter operation.
Excellent component cooling
Extending below the fin-stacks, the large NF-A15 fan not only contributes to the superb CPU cooling capabilities of the NH-D15S but also provides massive airflow over surrounding motherboard components and heatsinks, thus ensuring excellent component cooling performance.
SecuFirm2™ mounting system
Noctua's SecuFirm2™ mounting systems have become synonymous with quality, safety and easy installation. Supporting Intel LGA1851, LGA1700 (since 2021), LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) as well as AMD AM5 and AM4 (since 2019), the SecuFirm2™ mounting included with the NH-D15S is straightforward to install, provides perfect contact pressure and will stand the test of time even under heavy use.
Compatibility with past and future sockets
Complying with the open SecuFirm™ standard, the NH-D15S can be made compatible with the older LGA1366 and LGA775 sockets using the optional NM-I3 mounting kit, which is provided by Noctua free of charge. If technically possible, Noctua will also provide upgrade kits for future sockets.
NT-H1 thermal compound
Having received more than 100 awards and recommendations from hardware journalists around the world, Noctua's NT-H1 is a proven professional grade TIM solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability.
Noctua products are renowned for their impeccable quality and outstanding longevity. Like all Noctua fans, the supplied NF-A15 features an MTTF rating of more than 150,000 hours and the entire NH-D15S package.
Cooler Specification
Intel LGA1851, LGA1700, LGA1200, LGA1156, LGA1155, LGA1151, LGA1150 & AMD AM5, AM4
(Current socket compatibility applies to all coolers purchased since Q4 2021. For older coolers, please refer to this chart.)
Height (without fan)
160 mm
Width (without fan)
150 mm
Depth (without fan)
135 mm
Height (with fan)
160 mm
Width (with fan)
150 mm
Depth (with fan)
135 mm
Weight (with fan)
1150 g
Material
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
167
Max. TDP
see NSPR
Fan compatibility
140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25
Scope of delivery
- NF-A15 PWM premium fan
- NA-RC7 Low-Noise Adaptor (L.N.A.)
- Fan clips for second fan
- NT-H1 high-grade thermal compound
- SecuFirm2™ mounting kit
- Noctua Metal Case-Badge
FAN Specification
Model
Bearing
Max. rotational speed (+/- 10%)
1500 RPM
Max. rotational speed with L.N.A. (+/- 10%)
1200 RPM
Min. rotational speed @ 20% PWM (+/-20%)
300 RPM
140,2 m³/h
115,5 m³/h
Max. acoustical noise
24,6 dB(A)
Max. acoustical noise with L.N.A.
19,2 dB(A)
Input power (max.)
1,56 W
Voltage range
12 V
MTTF
> 150.000 h
DeepCool LS520 SE Liquid Cooler 240mm 4th Gen Dual-Chamber Pump 3100RPM 280w TDP AIO CPU Cooler with ARGB Fans – WHITE
DeepCool LS520 SE Liquid Cooler 240mm ARGB
EXPERT FEATURES
- The 4th generation pump’s microchannel design optimizes coolant flow, while the three-phase brushless motor is rated up to 3100 RPM. A thick, pure copper plate maximizes overall cooling efficiency.
- A mirror-plated top cover with a narrow frame captures an infinite reflection of 16 RGB LEDs for a vibrant visual effect. The smooth aluminum housing adds a premium finishing touch and a lustrous shine.
- Keep your cool with 120mm ARGB PWM fans that beat the heat with maximum static pressure and powerful airflow. An included low-speed adapter reduces maximum noise by up to 10dB for ultimate silence.
- Featuring DeepCool's patented Anti-Leak Technology. The internal valve regulates pressure and will purge it when internal pressure exceeds atmospheric pressure, leading to a longer useful life.
- Sturdy mounting brackets are included for both Intel and AMD sockets that are easy to install.
EXPERT SPECS
Application For
- Intel : LGA1700/1200/1151/1150/1155
- AMD : AM5/AM4
| Net Weight | 1346 g |
Radiator Dimensions |
282×120×27 mm(L×W×H) |
| Radiator Material | Aluminum |
| Tube length | 410 mm(L×W×H) |
| Pump Dimensions | 85×73×55 mm(L×W×H) |
| Pump Speed | 3100 RPM±10% |
| Pump Noise | 19 dB(A) |
| Pump Connector | 3-pin |
| Pump Rated Voltage | 12 VDC |
| Pump Rated Current | 0.38 A |
| Pump Power Consumption | 4.56 W |
| Fan Dimensions | 120×120×25 mm(L×W×H) |
| Fan Speed | 500~2250 RPM±10% |
| Fan Airflow | 85.85 CFM |
| Fan Air Pressure | 3.27 mmAq |
| Fan Noise | ≤32.9 dB(A) |
Fan Speed (with LSP) |
500~1600 RPM±10% |
| Fan Airflow (with LSP) | 60.85 CFM |
| Fan Air Pressure (with LSP) | 1.65 mmAq |
| Fan Noise (with LSP) | ≤28.2 dB(A) |
| Fan Connector | 4-pin PWM |
| Bearing Type | Hydro Bearing |
| Fan Rated Voltage | 12 VDC |
| Fan Rated Current | 0.25 A |
| Fan Power Consumption | 3.0 W |
| LED Type | Addressable RGB LED |
| LED Connector | 3-pin(+5V-D-G) |
| LED Rated Voltage | 5 VDC |
| LED Power Consumption | 2.7 W（PUMP）/ 2.1 W（FAN×2） |
| EAN | 6933412727989 |
| P/N | R-LS520-WHAMMM |
MSI MAG SHIELD M301 Micro-ATX Tower Case with USB 3.2, 1x 2.5″ + 1x 3.5″ Storage Support, 250mm GPU Clearance, ATX Power Supply, Pre-installed 120mm Fan & Multiple Cooling Options for Gaming Systems | ASH BLACK
Expert Features:
- Micro-ATX Tower Design: Compact chassis supporting Micro-ATX and Mini-ITX motherboards, ideal for building a powerful yet space-efficient gaming PC.
- Storage Support: Configurable layout for up to 1x 2.5" SSD and 1x 3.5" HDD for versatile storage options.
- Component Clearance: Supports GPUs up to 250mm in length and CPU coolers up to 160mm in height for high-performance components.
- Fan & Radiator Support: Allows multiple fan placements and radiator support for enhanced cooling. Pre-installed rear 120mm fan for effective airflow.
- Multiple I/O Ports: Includes 1x USB 3.2 Gen 1 Type-A, 2x USB 1.0 Type-A, Audio-out/Mic-in, and Reset and Power buttons, making it easy to connect peripherals.
- ATX Power Supply Compatibility: Can accommodate an ATX power supply up to 150mm in length, providing flexibility for power configurations.
Expert Specs:
- Product Name: MAG SHIELD M301
- Form Factor: Micro-ATX Tower
- Motherboard Compatibility: Supports Micro-ATX and Mini-ITX motherboards
- Expansion Slots: 4
- Maximum GPU Length: 250mm (9.84 inches)
- Maximum CPU Cooler Height: 160mm (6.3 inches)
- Power Supply Support: ATX
- Maximum PSU Length: 150mm (5.91 inches)
- Fan Size Support: Front: 2x 120mm, Rear: 1x 120mm
- Pre-installed Fan: 1x 120mm non-LED fan in the rear
- Radiator Size Support: Front: 240mm
- Dimensions: 345mm (D) x 206mm (W) x 352mm (H) / 13.58 x 8.11 x 13.86 inches
- Net Weight: 2.28 kg / 5.03 lbs
- Gross Weight: 3.12 kg / 6.88 lbs
I/O Ports:
- 1x USB 3.2 Gen 1 Type-A
- 2x USB 1.0 Type-A
- 1x Audio-out/Mic-in
- Reset Button
- Power Button
Drive Mount Support:
- 1x 2.5" SSD
- 1x 3.5" HDD