BOLT-12V-7A
BOLT UPS Battery 12V 7AH SLA Rechargeable Replacement Battery with T2 Terminal for UPS Back Up , Electric Scooter, Emergency Lighting, Wheel Chair, and More
$ 12.00
BOLT-12V-7A
BOLT UPS Battery 12V 7AH SLA Rechargeable Replacement Battery with T2 Terminal for UPS Back Up , Electric Scooter, Emergency Lighting, Wheel Chair, and More
VEIKK , A50 , DRAWING , TABLET , 10 |
{attribute:VEIKK , A50 , DRAWING , TABLET , 10 |
---|
Input | Rating | 1500VA | |
Voltage | 220/230/240 VAC, 1Ø2Wires | ||
Voltage Range | 162-290VAC | ||
Frequency | 50 or 60 Hz +/-10% (auto sensing) | ||
OuTput | Active Power | 600W | |
Voltage (backup mode) | 220/230/240VAC+/-1% | ||
Frequency (backup mode) | 50 or 60 Hz +/-1% | ||
Waveform | Simulated Sine Wave | ||
Transfer time | Typical 2 to 6 ms | ||
Protection | Full Protection | Overload, discharge, and overcharge protection | |
LED Indicators | AC Mode | Green lighting | |
Battery Mode | Green flashing | ||
Alarm | Battery Mode | Sounding every 10 seconds | |
Low Battery | Sounding every second | ||
Overload | Sounding every 0.5 second | ||
Fault | Continuously sounding | ||
Battery | Battery Type & Number | SLA 12V/7AH x 2 | |
Typical Recharge Time | 4~6 hours (to 90% full capacity) | ||
Backup time | 10~20min depending on load level |
Expert Features:
Capacity | 650VA |
Dimension (mm) | 286 x 96 x 138 (D x W x H) |
Weight (kg) | 4.3 |
Voltage Range | 162 ~ 290VAC (Single boost) 140 ~ 300VAC (Double boost) |
Frequency | 50Hz/60Hz (Auto-sensing) |
Phase | Single + GND |
Voltage Range | 220-240VAC |
Battery Mode | 220-240VAC |
Frequency | 50Hz ±1% (Battery mode) |
Waveform | Simulated sine wave (Battery mode) Sine wave (AC mode) |
Transfer Time | 2ms typical |
Type | 12V/8.2AH x 1 |
Backup Time | 8 - 20 mins depending on load |
Recharge Time | 2-4 hours recover to 90% capacity |
Interface | RS232, USB port, RJ45/RJ11 (Optional) |
Display | LED/LCD Optional |
Alarm | Batt. Mode, low battery, overload, fault, etc. |
Short Circuit Protection | Yes (Line mode & battery mode) |
Surge Protection | Yes |
Alarm | Audible & Visual |
Overload Protection | Line mode : 100 - 120% 1 min change to fault mode >120% change to fault mode immediatelyBattery mode : 100 - 120% 1 min change to fault mode >120% change to fault mode immediately |
Intelligent Battery | Prevent overcharging of battery |
Management | Protect battery and prolong battery life |
1. AC Mode Indicator Green LED Lighting 2. Battery Mode Indicator Battery Normal : Yellow LED Lighting and Blinking every 30s Battery Low : Yellow LED Lighting and Blinking every 2s 3. Overload and Fault Indicator Overload : Red LED Blinking every 2s Fault : Red LED Lighting 4. Power Switch 5. Power AC Input 6. Backup Outlets |
No account yet?
Create an AccountWhatsApp us